Current position : All Boards > Networking and Security > Pre-sale consulting > HUAWEI B683 3G Router Setup Guide for Network Connection
Post

Huawei580

Prestige:9

Bonus points:1434

Gold coins:2119

Title:Cadet

  Send Message

1#Font Size | Post On 2013-12-18 17:53 | View author only

HUAWEI B683 3G Router Setup Guide for Network Connection

Huawei B683 Setup Introduction 

This guide explains how to setup your HUAWEI B683 3G router with the ability to share the Internet connection among multiple computers. Once you have completed the instructions, the router can log onto the internet and you will be able to connect your computers wirelessly to the router.

Log in to the router's control panel. Open a web browser and open the following address: http://192.168.1.1

Select the following:

User Name: admin

Password: admin

Click on "Login".

Enter your PIN, click "Connection" in the control panel's left side

Enter the PIN code, which is printed on the plastic card where the SIM card was sitting. The "Save PIN Code" can advantageously be selected, otherwise you need to log in to your router's control panel and enter the PIN code every time if the router has been disconnected.

Not all models support this feature. In this case, you can disable the PIN code on the SIM card (see description further along in the manual). Click "Apply".

 

 

Set up the Internet connection and the internal wireless network

Click on the "Settings" at the top.
Click on the "Quick Setup" in the control panel's left side.

Click the "Next" button to start the setup wizard.

Verify the following:
Profile Name: B683
Dial-up Number: *99 #
User Name: <efterlades blank>
Password: <efterlades blank>
APN: Check to your SIM card provider and enter the APN here
IP Address: <Dynamic>

Click on the "Next" button.

 

 

(1) APN = Access Point Name Depending on which APN you choose, you have different visibility (IP address and ports available) compared to the rest of the Internet.

Other settings:
Authentication: CHAP+PAP
Connection Mode: Auto
Under Connection Mode can be selected "Manual". With this option, you must log into the router's control panel and connect the connection each time if the router has been disconnected.

Click on the "Next" button.

 

Select the following:

Name (SSID): The name of the B683 router's wireless local area networks (2)
SSID Broadcast: Enabled (3)

Click on the "Next" button.

(2) To be selected on all the computers that will be connected to the Huawei B683 wirelessly.
(3) The B683 is visible in a radius up to 100 meters.

 

Select the following:

Encryption Mode: WPA2-PSK
WPA Encryption: AES + TKIP
WPA Pre-Shared Key: code of your choice (4)

Click on the "Next" button.

Review your selections and exit the wizard by clicking "Finish".

The router now connects to the Internet and you can continue the installation on your computers with wired (LAN) or wireless (WLAN).

 

(4) Wireless key must be entered on each computer and then connect to the router wirelessly.

Changing the WiFi code of HUAWEI B683

 

To change the WiFi code on your HUAWEI B683, start by opening your internet browser, you can uses Internet Explorer to show how to do.

 

Step 1:  Enter "http://192.168.1.1" in the address field

 

Step 2: Login and enter "admin" into the password

 

Step 3: Locate the "Settings"

 

Step 4: Find "WLAN" and "WLAN Basic Settings"

 

Step 5: In the "WPA Pre-Shared Key", enter your new personal code and press "Save Settings" at the bottom

s00186119

Prestige:582

Bonus points:3388

Gold coins:2426

Title:Intermediate Engineer

  Send Message

2 # Post On 2013-12-18 17:59 | View author only
thank you for your sharing!

Wstyle

Prestige:113

Bonus points:1981

Gold coins:3084

Title:Junior Engineer

  Send Message

3 # Post On 2014-05-17 21:08 | View author only

Hello, 


I want to update the firmware of my Huawei B683, can you help me?


thanks. 



Huawei580

Prestige:9

Bonus points:1434

Gold coins:2119

Title:Cadet

  Send Message

4 # Post On 2014-05-20 14:15 | View author only

Hello, 


You can follow below the blog to update your Huawei B683 Firmware. 


http://www.4gltemall.com/blog/how-to-update-huawei-b683-firmware/

ferrarif40

Prestige:0

Bonus points:1007

Gold coins:1938

Title:Cadet

  Send Message

5 # Post On 2014-06-02 22:34 | View author only

can you please help me with the issue i am having, I have Huawei B683 from zain internet provider in jordan, I can user internet perfectly, and play Playstation 3 games online,  but i cant play GTA online... I tried to use different ISP and different router, it worked perfectly... so, is there any settings I have to make on my router in order to play this game online??


** Notes:

  • I contacted zain isp, and they told me there's no settings required on my router
  • I contacted rockstar support team and they told me to turn firewall off from the router, and to enable DMZ, enable uPnP.... it didn't work, they also sent me this:

    From the looks of the results you sent us it is your Ping that is causing the disconnection. Do you have anything else on your network when you play that could be eating up your Upload slots?

    Also, can you try directly connecting your console to the modem with a cord so that there is less interference and so we can get your latency down.

    so i tried to connect the ps3 using a modem cord.. same problem.. the playstation is perfectly connected to the internet, with NAT 2 and uPnP on... but i cant play GTA V online!!!!

bobsparrow

Prestige:0

Bonus points:1001

Gold coins:2001

Title:Cadet

  Send Message

6 # Post On 2014-12-11 18:05 | View author only

Good Day i forgot my password to log in on my router


Please assist