No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH8100 V3 Server V100R003 User Guide 25

This document describes the appearance, specifications, parameters, and structure of the RH8100 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the appearance, functions, and structure of the RH8100 V3, and how to install, remove, power on, power off, and configure the RH8100 V3, and perform other common operations on the RH8100 V3.

This document provides guidance for you to manage the RH8100 V3.

Intended Audience

This document is intended for:
  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

25

2018-09-03

Switching from the Single-system to the Dual-system and Switching from the Dual-system to the Single-system are updated.

24

2018-07-23

Added the mapping between CPUs and HFCs.

23

2018-06-13

Removing the Rear I/O Board and Installing the Rear I/O Board are added.

22

2018-05-08

Connecting a Ground Cable is updated.

21

2018-02-26

Logical Structure is updated.

20

2017-11-30

Changing an iBMC User Password is updated.

19

2017-08-31

Configuring the BIOS is updated.

18

2017-07-20

Configuring the BIOS is updated.

17

2017-05-25

Technical Specifications is updated.

16

2017-04-22

Connecting a Ground Cable is updated.

15

2017-03-17

Compute Module is updated.

14

2017-01-20

Appearance is updated.

13

2016-11-20

Product Specifications is added.

12

2016-10-20

Replacing the FM-D and Its Internal Components is added.

11

2016-10-08

Ports is updated.

10

2016-06-01

Physical Structure is updated.

09

2016-05-10

Appearance is updated.

08

2016-03-29

Appearance is updated.

07

2016-01-18

Logical Structure is updated.

06

2015-11-10

Physical Structure is updated.

05

2015-05-20

The RH8100 V3 Server Installation Guide and RH8100 V3 Server Troubleshooting are combined to form the RH8100 V3 Server User Guide.

04

2015-01-08

A note is added for PXE configuration in Configuring the BIOS.

03

2014-11-20

The description of the FM-B in Front I/O Module is added.

02

2014-10-25

Physical Structure is updated.

01

2014-10-15

This issue is the first official release.

Translation
Download
Updated: 2018-09-06

Document ID: EDOC1000055733

Views: 16829

Downloads: 920

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next