About This Document
Purpose
This document describes the Huawei X6800 server (X6800 for short) in terms of its appearance, features, specifications, system components, device installation, cable connections, and installation verification.
This document provides guidance on how to install the X6800.
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 13 (2018-09-05)
Optimized some figure display issues.
Issue 12 (2018-08-28)
- Added the description of snap-on guide rail installation methods for different chassis configurations. For details, see Installing a Chassis.
- Modified SN description. For details, see Panel.
Issue 11 (2018-05-24)
Added the server power-off procedue. For details, see Powering Off.
Issue 10 (2017-12-13)
Deleted descriptions about front SAS HDDs of the XH628 V3. For details, see Server Node Specifications.
Issue 09 (2017-07-05)
Modified environment parameter description and added description about heat dissipation restraints of different CPU models. For details, see Environment Specifications.
Issue 08 (2017-04-10)
This issue is the eighth official release, which incorporates the following changes:
Added the description about how to restore default HMM settings. For details, see Recovering the Default HMM Configuration.
Issue 07 (2017-04-01)
This issue is the seventh official release, which incorporates the following changes:
Modified the figures of guide rails, GPU temperature specifications, and the impact of parts replacement on the system.
Issue 06 (2016-07-18)
This issue is the sixth official release, which incorporates the following changes:
Added the description about how to install and remove a cable organizer and a snap-on track and how to connect 56G IB cables.
Issue 05 (2016-04-01)
This issue is the fifth official release.
Issue 04 (2015-11-10)
This issue is the forth official release.
Issue 03 (2015-07-13)
This issue is the third official release.
Issue 02 (2015-05-19)
This issue is the second official release.
Issue 01 (2015-02-06)
This issue is the first official release.
Previous
