No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Basic Storage Service Guide for Block 14

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"This document describes the basic storage services and explains how to configure and managebasic storage services."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the basic storage services and explains how to configure and manage basic storage services.

Intended Audience

This document is intended for:
  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 14 (2018-12-10)

This is the fourteenth official release, which includes the following updates:

Modified the descriptions about the chapter Creating a LUN.

Issue 13 (2018-08-30)

This is the thirteenth official release, which includes the following updates:

Optimized the descriptions about the chapter Configuration Process.

Optimized the description in Managing Basic Storage Services.

Issue 12 (2018-05-30)

This is the twelfth official release, which includes the following updates:

Optimized the description in Managing Basic Storage Services.

Issue 11 (2018-02-05)

This is the eleventh official release, which includes the following updates:

Optimized the descriptions about the chapter Configuration Process.

Issue 10 (2017-11-30)

This is the tenth official release, which includes the following updates:

Optimized descriptions about the chapter Creating a Disk Domain.

Optimized descriptions about bond ports.

Issue 09 (2017-10-30)

This is the ninth official release, which includes the following updates:

Optimized descriptions about the chapter Planning Disk Domains.

Issue 08 (2017-07-20)

This is the eighth official release, which includes the following updates:

Optimized descriptions about the chapter Planning Storage Pools.

Issue 07 (2017-05-10)

This issue is the seventh official release. The updates are as follows:

Optimized the description of the chapter Creating an Initiator and Modifying an Initiator.

Issue 06 (2017-03-27)

This issue is the sixth official release. The updates are as follows:

Updated the section about VVol configurations.

Issue 05 (2016-11-20)

It is the fifth official release. Information about V300R003C20 is added. The following lists the added and updated contents:

  • Added information about how to make storage space available on Hyper-V servers.
  • Added information about how to log in to DeviceManager using a Pad.
  • Added sections of Creating an Initiator and Modifying an Initiator.
  • Updated information about DeviceManager login.

Issue 04 (2016-07-25)

This issue is the fourth official release. The updates are as follows:

Updated the section about VVol configurations.

Modified the following items where the descriptions in documents are inconsistent with the products:
  • Values for capacity calculation were wrong.
  • The default subnet mask was different from that configured at delivery.
  • In the section about user creation, the user lever was different from that on DeviceManager.

Issue 03 (2016-04-30)

This issue is the third official release. The updates are as follows:

Added steps of configuring VVOL.

Issue 02 (2015-12-10)

This issue is the second official release. The updates are as follows:

Adding I/O Process, Configuring Host Connectivity, Performing an Emergency Rollback, Configuring VVOL, Managing a Port Group and Configuring and Managing Batch Configuration.

Adding available capacity calculation method in Planning the Capacity, adding planning the LUN type in Planning the Policies for LUNs and adding planning port in Planning Port And Service Data.

Revised some ambiguous descriptions.

Issue 01 (2015-08-30)

This is the first official release.

Translation
Download
Updated: 2018-12-10

Document ID: EDOC1000084197

Views: 33912

Downloads: 1890

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next