No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Parts Replacement 11

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

This document describes the procedure for replacing the parts of storage system in terms of safety operations, preparations, and precautions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Introduction

This document describes the procedure for replacing the parts of OceanStor 5300 V3&5500 V3&5600 V3&5800 V3&6800 V3 storage system in terms of safety operations, preparations, and precautions.

Intended Audience

This document is intended for all audience.

Symbol Conventions

The symbols that may be found in this document are defined as follows:

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 11 (2018-08-30)

This issue is the eleventh official release.

Updated descriptions about how to replace interface modules.

Issue 10 (2018-05-30)

This issue is the tenth official release.

Rectified some description of replacing a controller.

Issue 09 (2018-02-05)

This issue is the ninth official release.

Rectified some description of replacing a controller.

Issue 08 (2017-11-30)

This issue is the eighth official release.

Optimized the description of the 8 Gbit/s Fibre Channel Interface Module (Eight Ports).

Issue 07 (2017-07-20)

This issue is the seventh official release.

Added the procedure for removing/inserting the power cables.

Issue 06 (2017-03-27)

This issue is the sixth official release.

Added the description of Replacing a Mini SAS HD Cable.

Issue 05 (2016-11-20)

This issue is the fifth official release.

Modified the description of checking system status.

Issue 04 (2016-07-25)

This issue is the fourth official release.

Added the description of Replacing an 8 Gbit/s Fibre Channel Interface Module (Eight Ports) and Replacing an MPO-4*DLC Optical Fiber.

Issue 03 (2016-04-30)

This issue is the third official release.

Added the description of how to obtain spare parts.

Issue 02 (2015-12-10)

This issue is the second official release.

Added the description of how to check the replacement.

Issue 01 (2015-08-30)

This issue is the first official release.

Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000084203

Views: 16548

Downloads: 567

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next