No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Support Documentation

(video) KunLun Mission Critical Server Hardware Installation and Parts Replacement 03

Published On: 2017-11-29 Views: 16773 Downloads: 2806 Document ID: EDOC1000118007 Description:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Contents

1.1.10 Replacing an FPC

1.1.11 Replacing an REE

1.1.12 Removing an Acoustic Door

1.1.13 Installing an Acoustic Door

1.1.1 Installing a CME

1.1.2 Removing the CME

1.1.3 Installing an SCE

1.1.4 Removing an SCE

1.1.5 Removing an SCE (Supporting REEs)

1.1.6 Installing an SCE (Supporting REEs)

1.1.7 Installing an APD

1.1.8 Removing the APD

1.1.9 Replacing a Front Bezel

1.10.1 Replacing an Air Duct (REE)

1.10.2 Replacing a Hard Disk (Switch Module)

1.10.3 Replacing a RAID Controller Card (Switch Module)

1.10.4 Replacing a Supercapacitor (Switch Module)

1.11.1 Replacing a Hot-Swappable PCIe Card(REE)

1.11.2 Replacing a non-hot-swappable PCIe card (REE)

1.2.1 Replacing a PFM in the CME

1.2.2 Replacing an ACM

1.2.3 Replacing a CPI

1.2.4 Replacing a CIM

1.2.5 Replacing a CMC

1.3.10 Replacing a Fan Module

1.3.11 Installing an AC PSU in an SCE

1.3.1 Replacing an SCM

1.3.2 Replacing an FIO (FIO-A)

1.3.3 Replacing an FIO (FIO-B)

1.3.4 Replacing an FIO-G (Supporting REEs)

1.3.5 Replacing a BIO

1.3.6 Replacing an NCM

1.3.7 Replacing an LPM

1.3.8 Replacing an Indicator Board

1.3.9 Replacing an Indicator Board Interface Module

1.4.1 Replacing an MBM

1.4.2 Replacing a CPU

1.4.3 Replacing a DIMM

1.5.1 Replacing a Hard Disk (FIO-A)

1.5.2 Replacing a PRM (FIO-A)

1.5.3 Replacing a PCIe Card in the FIO (FIO-A)

1.5.4 Replacing a RAID Controller Card (FIO-A)

1.5.5 Replacing a Supercapacitor (FIO-A)

1.6.1 Replacing a Hard Disk (FIO-B)

1.6.2 Replacing a RAID Controller Card (FIO-B)

1.6.3 Replacing a Supercapacitor (FIO-B)

1.7.1 Replacing an LOM

1.8.1 Replacing a Hot-Swappable PCIe Card (SCE)

1.8.2 Replacing a Non-Hot-Swappable PCIe Card (SCE)

1.9.1 Replacing a Switch Module

1.9.2 Replacing a Fan Module (REE)

1.9.3 Replacing a Full-height Hot-Swappable BIO (BIO-E)

1.9.4 Replacing a Half-Height BIO (BIO-C or BIO-D)

1.9.5 Replacing an AC PSU from an REE)

Related Documents