No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

How to Ping Through the VIS6000 Configuration Network Port?

Publication Date:  2012-07-19 Views:  351 Downloads:  0
Issue Description
After the VIS6000 is started, the VIS6000 configuration network port is connected by the crossover network cable. The default IP address of the configuration network port is 192.168.3.10. If the IP address of the connected management terminal is on the same network segment as the VIS configuration network port IP address, you cannot ping through the default IP address of the VIS configuration network port.
Alarm Information
None
Handling Process
The default IP address of the configuration network port is 192.168.3.10. Set the IP address of the connected management terminal to 192.168.3.11. Now, you can ping through the default IP address of the configuration network port and manage configuration devices through the default IP address of the configuration network port.
Root Cause
VIS configuration file rules
Suggestions
None

END