To have a better experience, please upgrade your IE browser.upgrade
Questo sito utilizza cookie di profilazione (propri e di terze parti) per ottimizzare la tua esperienza online e per inviarti pubblicità in linea con le tue preferenze. Continuando a utilizzare questo sito senza modificare le tue preferenze acconsenti all’uso dei cookie. Se vuoi saperne di più o negare il consenso a tutti o ad alcuni cookie clicca qui>
The website that you are visiting also provides Arabian language. Do you wish to switch language version?
يوفر موقع الويب الذي تزوره المحتوى باللغة العربية أيضًا. هل ترغب في تبديل إصدار اللغة؟
The website that you are visiting also provides Russia language Do you wish to switch language version?
Данный сайт есть в английской версии. Желаете ли Вы перейти на английскую версию?
Product and version information:
When the FC host port on the storage device was directly connected to the Atto 42ES HBA, and the FC host port Mode was Public Loop, the FC host port Running Status was Offline on the ISM.
Set the FC host port Mode to Point to Point.
1. Log in to the ISM and expand the storage node, and then choose Device Info > Ports in the navigation tree.
2. Select the FC host port and right-click it.
3. Choose Modify in the shortcut menu.
4. In the Modify FC Port dialog box, set Mode to Point to Point.
The default Atto Celerity FC-42ES topology mode is "P2P preferred, then loop". When it was setting up a connection to the storage device, we recorded the interaction process on the link by using the Finisar packet catcher.Figure1 shows the record.
Figure 1 Interaction process on the link
After analyzing the process, we found out that after the storage device sent a LIP command (a control command in the FC protocol to notify the other party of the FC host port Mode being Public Loop), Atto sent a NOS command (a control command in the FC protocol to terminate the current topology negotiation). It is concluded that the HBA has defects in negotiating topology modes.