How to Configure AV Function in the USG for UTM Demo.

Publication Date:  2012-07-21 Views:  246 Downloads:  0
Issue Description
1,How to do a UTM demo for customer
2,How to configure the AV function in USG
3,How to test the AV demo result.
Alarm Information
None.
Handling Process
Configure the USG2200 as follows:
Step 1Set the IP addresses of the interfaces, define routing polices, and add routes to the routing table.
interface GigabitEthernet0/0/0
ip address 192.168.0.1 255.255.255.0
interface GigabitEthernet0/0/1
ip address 10.1.1.1 255.255.255.0
firewall zone trust
set priority 85
add interface GigabitEthernet0/0/0
firewall zone untrust
set priority 5
add interface GigabitEthernet0/0/2 
firewall policy interzone trust untrust outbound
policy 1
policy source 10.1.1.0 mask 24
action permit
Step 2 Configure a AV policy.
Step 1
Build a policy name “test” for AV

  Step 2
Enable AV http detection

Step 3
Enable AV function and apply it

Step 4
Enable AV function in firewall public policy and apply it

                      Step 3     TestStep 1
Open the http server and upload AV file

Step 2
Use HTTP client to download AV file from HTTP server
 Step 4     Demo effect

Root Cause
Networking in lab environment:
As shown in the following figure, USG firewall have separated two networks.One is 10.1.1.0/24,another is 192.168.0.0/24.The demo is HTTP Client get AV file from the HTTP server,the file include virus.If enabling AV function in USG,and it can block it.The customer can find the warning form USG.
Suggestions
None.

END