MCU or terminal state constantly shows the network packet loss
First, the investigation under the MCU and terminal network port mode is the same as the switch network port mode, ensure that equipment and switches modes correspond.
Both ends of the Ethernet port operating mode must be set consistent, otherwise there will be problems in consultation, leading to network packet loss;
Second, if the conference network and office network sharing, mutual influence will lead to the status display network constantly dropping. Such protection is recommended QOS features. Specific QOS set the reference attachment.
MCU status display terminal and network continues to analyze the reasons for dropping the following two points:
1, MCU and terminal mode and the switch network port network port patterns are different, so that negotiations have problems caused by network constantly dropping;
2, the conference network and office network sharing, mutual influence resulting network continues dropping;