No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-Multi-Rectifier Fault alarm generate, what should be done

Publication Date:  2014-10-30 Views:  552 Downloads:  0
Issue Description
Multi-Rectifier Fault alarm generate, what should be done?
Solution
Possible Causes:
1) The subrack or slot connector is faulty.
2) The rectifier is faulty.
3) The monitoring unit is faulty.

Measures:

1) Remove the rectifier and check whether the slot connector is damaged or deformed. If yes, repair or replace the subrack or slot connector.

2) If the alarm persists after the rectifier is reinstalled, replace the rectifier.

3) If the alarm persists after the monitoring unit is restarted, replace the monitoring unit.

END