FAQ-Changes of Local Port Mirroring Commands

Publication Date:  2015-04-30 Views:  209 Downloads:  0
Issue Description
Changes of Local Port Mirroring Commands.
Solution
Starting from V200R002C00, observe-port-index is deleted from observe-port [ observe-port-index ] interface interface-type interface-number and port-mirroring to observe-port observe-port-index { both | inbound | outbound }.

V200R001
Command used to configure an observing interface: observe-port [ observe-port-index ] interface interface-type interface-number

Command used to configure a mirrored interface: port-mirroring to observe-port observe-port-index { both | inbound | outbound }

To configure local port mirroring, perform the following operations:
  1. Run the system-view command to enter the system view.
  2. Run the observe-port [ observe-port-index ] interface interface-type interface-number command to configure a local observing interface.
  3. Run the interface interface-type interface-number command to enter the view of a specified interface.
  4. Run the port-mirroring to observe-port observe-port-index { both | inbound | outbound } command to configure a local mirrored interface.
V200R002 and Later Versions
Command used to configure an observing interface: observe-port interface interface-type interface-number

Command used to configure a mirrored interface: mirror to observe-port { both | inbound | outbound }

To configure local port mirroring, perform the following operations:
  1. Run the system-view command to enter the system view.
  2. Run the observe-port interface interface-type interface-number command to configure a local observing interface.
  3. Run the interface interface-type interface-number command to enter the view of a specified interface.
  4. Run the mirror to observe-port { both | inbound | outbound } command to configure a local mirrored interface.

END