FAQ-How Can I View the Usage of the DSP Resources

Publication Date:  2015-05-06 Views:  208 Downloads:  0
Issue Description
How Can I View the Usage of the DSP Resources?
Solution
V200R002C00 and earlier versions

Run the display voice dsp-dimm state {  slot/dsp-index  |  channel  slot/dsp-index/channel   }  command. The idle item in the command output shows the remaining DSP resources. For example:

<Huawei> display voice dsp-dimm state 15/0 Symbol: 0-idle $-G.711 busy A-All busy W-Wastage X-fault @-IP loopback *-PCM loopback #-prohibited Channel NO.  DSP channel state ----------------------------------------------------------------------

  0000-0049  00000 00000 00000 00000 00000 00000 00000 00000 00000 00000

  0050-0099  00000 00000 00000 00000 00000 00000 00000 00000 00000 00000

  0100-0149  00000 00000 00000 00000 00000 000                          

  Total:                                                                

      128 DSP channel                                                   

      128 idle, 0 G.711 Busy, 0 All Busy, 0 Wastage, 0 Fault,           

      0   IP loopback, 0 PCM loopback, 0 prohibited

In the preceding information, 128 idle indicates that 128 DSP channels are idle and the current DSP resources are sufficient.

Later versions than V200R002C00

Run the display voice dsp state {  slot/dsp-index  |  channel  slot/dsp-index/channel   }  command. The idle item in the command output shows the remaining DSP resources. For example:

<Huawei> display voice dsp state 15/0 Symbol: 0-idle $-G.711 busy A-All busy W-Wastage X-fault @-IP loopback *-PCM loopback #-prohibited Channel NO.  DSP channel state ----------------------------------------------------------------------

  0000-0049  00000 00000 00000 00000 00000 00000 00000 00000 00000 00000

  0050-0099  00000 00000 00000 00000 00000 00000 00000 00000 00000 00000

  0100-0149  00000 00000 00000 00000 00000 000                          

  Total:                                                                

      128 DSP channel                                                   

      128 idle, 0 G.711 Busy, 0 All Busy, 0 Wastage, 0 Fault,           

      0   IP loopback, 0 PCM loopback, 0 prohibited

In the preceding information, 128 idle indicates that 128 DSP channels are idle and the current DSP resources are sufficient.

END