No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-When You Configure the set priority dscp and remark dscp Commands Simultaneously, Which One Takes Effect

Publication Date:  2015-05-06 Views:  607 Downloads:  0
Issue Description
When You Configure the set priority dscp and remark dscp Commands Simultaneously, Which One Takes Effect?
Solution
The set priority dscp command sets the DSCP priority of protocol packets sent by the device. To change the DSCP priority of protocol packets, you can also configure a traffic policy, define remark dscp for protocol packets in the traffic policy, and apply the traffic policy to the outbound direction of an interface.

If the ip soft-forward enhance enable command has been executed to enable the enhanced IP forwarding function, the remark dscp command takes effect. If the ip soft-forward enhance enable command is not used, the set priority command takes effect.

END