No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-Why Does an AC Fail to Report Unauthorized APs After Calibration Is Enabled

Publication Date:  2015-06-25 Views:  295 Downloads:  0
Issue Description
Why Does an AC Fail to Report Unauthorized APs After Calibration Is Enabled?
Solution
The possible causes are:

Unauthorized AP detection is not enabled when calibration is enabled on the AC.

After the calibration command is executed, the AC does not send neighbor detection messages to APs.

APs do not receive neighbor detection messages from the AC.

APs are not enabled to detect neighbors.

APs do not report detected information to the AC.

The AC does not receive neighbor information sent from APs.

Errors occur when the AC is saving received neighbor information.

END