FAQ-Why Is a Faulty AP Still in Normal State on eSight and eSight Receives No Alarm

Publication Date:  2015-06-26 Views:  239 Downloads:  0
Issue Description
Why Is a Faulty AP Still in Normal State on eSight and eSight Receives No Alarm?
Solution
Check whether the following commands are performed.

[AC6605]snmp-agent target-host trap-hostname xxx address x.x.x.x udp-port 162 trap-paramsname public
[AC6605]snmp-agent target-host trap-paramsname public v2c securityname public
[AC6605]snmp-agent trap source Vlanif100
[AC6605]snmp-agent trap enable

END