FAQ-How Can I Adjust the Day/Night Switch Frequency

Publication Date:  2015-06-27 Views:  398 Downloads:  0
Issue Description
How can I adjust the day/night switch frequency?
Solution
1. Log in to the IPC web page as the admin user.

NOTE:
 For the default password of the admin user, see the user guide for the camera model.
 This case uses the web page of IPC 5811-WD-Z20 as an example. For the setting method of other camera models, see the corresponding user guide.

2. Choose Settings > Channel Configuration > ISP Parameters.

The ISP Parameter page shown in Figure 5-3 is displayed.

Figure 5-3 ISP Parameters page



3. Set Day/Night mode to Automatic.

4. Set Day/Night sensitivity to a smaller value.

NOTE:
The Day/Night sensitivity parameter can be set only after Day/Night mode is set to Automatic. A higher sensitivity indicates easier B/W-to-color switch.

END