Here is the way to reset the NAS node to the factory mode

Publication Date:  2015-06-30 Views:  246 Downloads:  0
Issue Description
The NAS is used for a long time, and for some reason, we need to reset it to the initial status with original configuration.
Solution

notes: this action will initial the device and the current configuration will lost, please pay attention to it.

According to the following steps, you will reset factory successfully.
 First, you should use the support account login the file engine or NAS via serial port.
 Second, please execute the below commands:
# /opt/HS/scripts/clean_hs.sh
# /opt/VRTSnasgw/scripts/cleanup.sh
 Third, please running the command “reboot –nf ”  on each node.
 After all nodes restart completely, you will find the UI like the following, it shows that you reset factory successfully.

END