How Can I Prevent Certain Module Logs, Such as Command Operation Logs from Being Sent to a Log Buffer?
The info-center source command sets the levels of output logs for each module. Logs whose levels are lower than or equal to the given value are sent. (The severer the information, the lower the level.)
If no output level is specified for each level, the default level is used.
For example, set the default output level to errors.
info-center source default channel logbuffer log level error
To send the command operation logs whose levels are lower than or equal to the errors level to the log buffer, perform the following operations:
info-center source SHELL channel logbuffer log level error