No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-What Can I Do If Severe Video Jitter Occurs

Publication Date:  2015-08-06 Views:  361 Downloads:  0
Issue Description
When I used a short cable to connect the SD OUT port on my endpoint to a monitor, the video output was normal. When I used a long cable to connect the two, however, severe video jitter occurred.
Solution
This is a symptom of signal attenuation.

To address signal attenuation, use either of the following methods:
  • To improve signal quality, use an SD video driver, which must be purchase separately.

END