FAQ-How Can I Restore the Endpoint to Its Default Settings

Publication Date:  2015-08-07 Views:  257 Downloads:  0
Issue Description
How can I restore a 9000 series endpoint to its default settings?
Solution
To restore the endpoint to its default settings, use one of the following methods:

While the endpoint is on, toggle the left DIP switch on the rear panel six times within 5 seconds. After the endpoint is restored to its default settings, its IP address is reset to 192.168.1.1. Figure 12-1 shows a DIP switch.

Figure 12-1 ViewPoint 9030, VP9035A, ViewPoint 9039S, or VP9039A DIP switch




From the remote controlled UI, choose Settings > Installation > Restore Default. In the displayed dialog box, enter the serial number of the endpoint and click OK.

From the web interface, choose System Settings > Restore Default. In the displayed dialog box, enter the serial number of the endpoint, click Restore Default, and confirm your operation.

END