How to login the USG6000V firewall in eNSP from IE

Publication Date:  2016-06-21 Views:  1720 Downloads:  0
Issue Description
eNSP V100R002C00B380 and later support USG6000V, How to login the USG6000V firewall in eNSP from IE?
Solution

add a cloud element, move mouse cursor to cloud element, and click mouse right button,

Open Cloud configuration interface, select the binding information, add a UDP and a network card.

Select a network card (if you select physical network card, must keep it up, that is, it is connected the cable and configured IP address).

 




 

 

 

As follows Add UDP and network cards in the order of the figure.

Operation steps are as follows,

1, select UDP

2, click the Add

3, select a network card

4, click the Add

5, select the port number is 2

6, check the two-way channel

7, click the Add

Later in the CLI PC window, you can Ping test

 

C:\Users>ipconfig

IP Windows configuration

Ethernet adapter local connection 4:

DNS suffix attached to a specific:

IPv4 address . . . . . . . . . . : 192.168.168.11

A subnet mask. . . . . . . . . . : 255.255.255.0

The default gateway.........:

 

C:\ping 192.168.168.1

Being 192.168.168.1 Ping with 32 bytes of data:

Reply from =146ms: byte =32 time TTL=255 192.168.168.1

......

Ping statistical information of 192.168.168.1:

Packet: Sent = 4, Received = 4, lost = 0 (0% lost),

Average time of round trip (in milliseconds):

The shortest = 5ms, the longest = 146ms, average = 79ms

If you can ping and then you can login firewall in the IE browser as follows URL

Https://192.168.168.1:8443

And then the login window is pushed up.

END