Configuration not working due to inactive-configuration

Publication Date:  2017-01-05 Views:  201 Downloads:  0
Issue Description

We configured eth-trunk 1 and we want to add an interface. As we can see below an error occurs.

[~CE-40GE1/0/9]eth-trunk 1
Error: The parameter of trunk command is invalid, because the trunk has added member of other port-type.

We check the confgiuration on interface. As we can see, nothing is configured.

[~CE-40GE1/0/9]dis this
interface 40GE1/0/9
return

If we check the output from command display interface brief, we can see that no interface is added to Eth-trunk1.



Solution

Is not working due to inactive configuration. The solution is to clear inactive configuration. The command is clear inactive-configuration all .

After, we can add interface 40Ge1/0/9 to eth-trunk1.

<CE> display interface Eth-Trunk 1
Eth-Trunk1 current state : UP                                                                                                                   
Line protocol current state : UP                                                                                                                
Description:
Switch Port, PVID :    1, TPID : 8100(Hex), Hash Arithmetic : profile default, Maximal BW: 1Gbps, Current BW: 1Gbps, The Maximum Frame Length is 9216                                                              
Internet protocol processing : disabled                                        
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is XXXX
Current system time: XXX                                      
Physical is ETH_TRUNK                                                          
    Last 300 seconds input rate 12074 bits/sec, 6 packets/sec                  
    Last 300 seconds output rate 8036 bits/sec, 4 packets/sec                  
    Input: 379523 packets,94630572 bytes                                       
           0 unicast,0 broadcast,0 multicast                                   
           0 errors,0 drops                                                    
    Output:254405 packets,62846292 bytes                                       
           0 unicast,0 broadcast,0 multicast                                   
           0 errors,0 drops                                                    
    Last 300 seconds input utility rate:  0.01%                                
    Last 300 seconds output utility rate: 0.01%                                
----------------------------------------------------------                     
PortName                      Status              Weight                       
----------------------------------------------------------                     
40GE1/0/9                     UP                  1
----------------------------------------------------------                     
The Number of Ports in Trunk : 1                                               
The Number of Up Ports in Trunk : 1  

END