No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX317 Pass-Through Module V100R001 User Guide 18

This document describes the CX317 10 gigabit Ethernet (GE) pass through module of the Tecal E9000 server in terms of its features, installation, removal, and maintenance.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About this document

About this document

Purpose

This document provides information on the features, installation, removal, and maintenance of the CX317 10 Gigabit Ethernet (GE) pass-through module of the E9000 server.

Intended Audience

This document is intended for:

  • Technical support personnel
  • Maintenance personnel

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Conventions

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

18

2018-09-20

This issue is the eighteenth official release.

17

2018-04-17

This issue is the seventeenth official release.

16

2017-03-27

This issue is the sixteenth official release, and includes the following changes:

15

2017-02-17

This issue is the fifteenth official release,and includes the following changes:

  • Added a Mezz1 networking diagram in Ports.
  • Deleted the "Changing the Password of the BMC" section.

14

2017-01-13

This issue is the fourteenth official release,and includes the following changes:

13

2016-11-30

This issue is the thirteenth official release

12

2016-03-31

This issue is the twelfth official release,and includes the following changes:

  • The rates and quantities of internal and external ports in the logical structure diagram are added to Architecture.

11

2015-11-09

This issue is the eleventh official release,and includes the following changes:

  • Ports is modified, for the port mapping between the CX317 and the MZ312 is added.
  • The long-term storage temperature and humidity are added to Technical Specifications.

10

2015-02-16

This issue is the tenth official release.

09

2014-09-15

This issue is the ninth official release,and includes the following changes:

  • "Tecal" is deleted from the product document.

08

2014-07-30

This issue is the eighth official release, and includes the following changes:

07

2014-02-10

This issue is the seventh official release.

06

2013-11-18

This issue is the six official release, and includes the following changes:

  • Added the password change description in the "Changing the Password of the BMC" section.

05

2013-09-30

This issue is the fifth official release, and includes the following changes:

  • Ports is modified, for the port mapping between the CX317 and the MZ311 is added.

04

2013-08-30

This issue is the fourth official release, and includes the following changes:

  • Appearance is modified, for the figure of the positions and slots for installing the pass-through modules is modified.
  • Ports is modified, for the port mapping between the CX317 and the MZ510 is modified.
  • Ports is modified, for the port mapping between the CX317 and the MZ512 is added.

03

2013-06-20

This issue is the third official release, and includes the following changes:

  • Added the "Changing the Password of the BMC" section.

02

2013-04-01

This issue is the second official release, and includes the following changes:

01

2013-01-04

This issue is the first official release.

Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000015890

Views: 6382

Downloads: 682

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next