No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX912 Switch Module V100R001C10 User Guide 17

This document describes the CX912 multi-plane switch module (CX912 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX912 whose 10GE switching planes use the software versions of 1.2.1.0.39, 2.00 and later.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the CX912 multi-plane switch module of the E9000 server in terms of its features, installation, removal, and configuration.

The product features and commands for the 10GE switching plane of the CX912 vary according to the software version. For details, see the documents listed in the following table.

NOTE:

Run the display version command in the switching plane CLI and select a reference document based on the Switch Version or Software Version displayed in the command output.

Huawei Support Website Version

10GE Switching Plane Software Version

Reference Document

V100R001C00 or V100R001C00SPCxxx

1.1.0.200.3

See the CX912 Switch Module V100R001C00 User Guide.

1.1.3.300.5

1.1.3.301.6

1.2.1.0.19

1.2.1.0.21

2.23

2.26

2.29

V100R001C10 or V100R001C10SPCxxx

1.2.1.0.39

See this guide.

Versions in the x.xx format, except 2.23, 2.26, and 2.29.

NOTE:

2.05 and later versions are displayed in the x.xx format.

Intended Audience

This document is intended for:

  • Technical support personnel
  • Installation and commissioning engineers
  • Field maintenance engineers
  • System maintenance engineer

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

17

2018-09-20

This issue is the seventeenth official release.

16

2018-03-30

This issue is the sixteenth official release.

15

2017-09-14

This issue is the fifteenth official release, and includes the following changes:

This issue is the twelfth official release, and includes the following changes:

Deleted the contents about FCoE in 2.1 Functions, Advantages, Internal Chassis Networking.

14

2017-03-27

This issue is the fourteenth official release, and includes the following changes:

  • Added product model descriptions to 2.2 Appearance.
  • Modified the relationships between switching plane software versions and reference documents in About This Document.

13

2016-11-30

This issue is the thirteenth official release.

12

2016-08-31

This issue is the twelfth official release, and includes the following changes:

11

2016-03-31

This issue is the eleventh official release, and includes the following changes:

  • In Software and Hardware Compatibility, the following note is added: FC ports of the CX912 support only single-mode and multi-mode Brocade swappable optical modules.
  • Added 6.7 Configuring an FTP Server and Using the CLI to Collect 10GE switching plane Information.
  • Added 6.12 Using the CLI to Collect FC switching plane Information.
  • Added the rates and quantities of internal and external ports in the logical structure diagram in Logical Architecture.
  • In the physical structure of Hardware Structure, the MX210 switch module name is changed to MX210 mezzanine switch module.

10

2015-11-09

This issue is the tenth official release, and includes the following changes:

Added the long-term storage temperature and humidity to 2.9 Technical Specifications.

09

2015-07-17

This issue is the ninth official release, and includes the following changes:

The reference to the throughput is added to 2.9 Technical Specifications.

08

2015-03-20

This issue is the eighth official release.

07

2015-02-16

This issue is the seventh official release, and includes the following changes:

The reference to the Networking Assistant is added to Internal Chassis Networking.

06

2015-01-23

This issue is the sixth official release, and includes the following changes:

The figure in Internal Chassis Networking is updated.

05

2014-11-10

This issue is the fifth official release, and includes the following changes:

The 4.2 Default Information is added.

04

2014-09-15

This issue is the fourth official release, and includes the following changes:

"Tecal" is deleted from the product document.

03

2014-05-13

This issue is the third official release.

02

2014-04-08

This issue is the second official release.

01

2014-01-02

This issue is the first official release.

Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000036343

Views: 18228

Downloads: 1866

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next