OSN 8800 6800 3800 V100R008C10 Supporting Tasks 02

Publication Date:2014-09-22 Views:5201 Downloads: 11 Document No.: DOC1000042267 Product Version: OptiX OSN 8800 T16 V100R008 Description:

00-1 Title Page

00-2 About This Document

00-3 Contents

01-01 Performing Software Loopback on NMS

01-02 Performing Hardware Loopback on Site

01-03 Disabling Service-Affecting Settings Automatically

01-04 Checking Fiber Jumpers by Using an Optical Power Meter

01-05 Opening Closing Lasers

01-06 Querying Optical Power of the Board

01-07 Testing Optical Power by Using an Optical Power Meter

01-08 Testing the Optical Power of the MON Port

01-09 Adjusting Adding and Removing Attenuator

01-10 Adjusting Internal Attenuators on Boards

01-100 Configuring Optical Amplifier Boards

01-101 Monitoring the Optical Power by MCA OPM8 Board

01-102 Setting the Board Relay Mode for the Line Boards

01-103 Configuring Electrical Ports of a Board

01-104 Setting the Orderwire Board

01-105 Configuring Orderwire

01-106 Configuring Conference Calls

01-107 Configuring Express Orderwire

01-108 Dividing Orderwire Subnets

01-109 OSC ESC Conflict

01-11 Querying the Gain of Optical Amplifier Boards

01-110 Disabling the Unused Auxiliary Ports

01-111 Replicating the NE Data

01-112 Configuring Subrack Cascading Mode of an NE

01-113 Changing a Subrack Attribute

01-114 Querying the Status of a Slave Subrack

01-115 Deleting a Slave Subrack

01-116 Enabling the Port Blocking Function

01-117 Modifying Fiber Cable Information

01-118 Deleting Fibers

01-119 Configuring the Edge Port

01-12 Adjusting the Gain of Optical Amplifier Boards

01-120 Creating Board Optical Cross-Connection

01-121 Configuring Board WDM Port Attributes

01-122 Configuring Board SDH Interface Attributes

01-123 Configuring the Receive Wavelength of Boards

01-124 Enable the Open Fiber Control (OFC)

01-125 Setting Automatic Laser Shutdown on the WDM Board

01-126 Setting the Function of Board Removal Indication

01-127 Enabling the OAMS Power Monitoring Function

01-128 Setting the Working Mode of an Optical Amplifier Board

01-129 Setting AFEC Grade

01-13 Querying the FEC Working State

01-130 Configuring Port Mirroring

01-131 Configuring Test Frames

01-132 Configuring the RMON

01-133 Collecting Fault Data

01-134 Managing WDM Trail

01-135 Deleting an NE Database

01-136 Inspecting and Cleaning the Optical Fiber Connectors

01-137 Configuring FE Signal Pass-through

01-14 Enabling the FEC Function

01-15 Querying the FEC Mode

01-16 Setting the FEC Mode

01-17 Querying the IPA Restart Mode

01-18 Restarting the IPA Function Manually

01-19 Querying Board Temperature

01-20 Cleaning Air Filters

01-21 Querying the Current Alarms

01-22 Querying Optical Module Information

01-23 Removing and Inserting Fibers

01-24 Performing a Cold Reset of a Board

01-25 Performing a Warm Reset of a Board

01-26 Querying the Insertion Loss Between the TDC and RDC Optical Ports on the OAU1 Board

01-27 Querying and Setting the Service Type on the Client Side of a Board

01-28 Querying and Setting the Working Mode of the Ethernet Port

01-29 Checking Logical Fibers

01-30 Enabling Disabling the ALS Function

01-31 Setting the Channel Use Status

01-32 Querying the Operating Wavelength

01-33 Setting the Alarm Threshold of the Board Input Optical Power

01-34 Setting Alarm Masking

01-35 Setting Alarm Reversion

01-36 Setting Alarm Severity and Auto Reporting

01-37 Setting Alarm Suppression Status

01-38 Checking the Status of Boards

01-39 Enabling Performance Monitoring Function

01-40 Browsing the Current Bit Error Performance

01-41 Checking Historical WDM Performance Events

01-42 Querying Current SDH Performance Events

01-43 Querying Historical SDH Performance Events

01-44 Checking Environment Monitoring Temperature

01-45 Querying Optical Power of the Station

01-46 Querying Optical Power of the Entire Network

01-47 Setting Reference Input Output Optical Power

01-48 Setting Ethernet Port Traffic Monitoring

01-49 Querying Ethernet Port Traffic Monitoring

01-50 Querying IPA Function

01-51 Querying the ALC Function

01-52 Querying the APE Function

01-53 Backing Up Device Data to the NMS Server or the NMS Client

01-54 Querying Protection Switching State

01-55 Creating NEs in Batches

01-56 Setting Communication Parameters of an NE

01-57 Modifying the NE ID

01-58 Checking Communication Parameters

01-59 Creating an NE User

01-60 Setting the Node ID

01-61 Recovering Device Data from the NMS Server or the NMS Client

01-62 Activating the NE Database

01-63 Restoring the NE Database from the CF Card

01-64 Querying the NE User Management Table

01-65 Querying the Node ID of the NE

01-66 Manually Backing Up the NE Database to a CF Card

01-67 Replacing Board Type

01-68 Enabling Disabling the IPA Function

01-69 Modifying the NE Name

01-70 Creating Fiber Connections Between NEs in Graphic Mode

01-71 Creating Internal Fiber Connections of an NE in Graphic Mode

01-72 Creating Fiber Connections in List Mode

01-73 Adding Ports

01-74 Setting Automatic Synchronization of the NE Time with the NMS Time

01-75 Backing Up the NE Database to the SCC Board

01-76 Creating a Single NE

01-77 Switching a Logged-In NE User

01-78 Modifying the Optical NE Name

01-79 Modifying GNE Parameters

01-80 Changing the GNE for NEs

01-81 Changing a GNE to a Normal NE

01-82 Changing a Normal NE to a GNE

01-83 Deleting NEs

01-84 Configuring the NE Data Manually

01-85 Adding Boards

01-86 Deleting Boards

01-87 Configuring the Standard NTP Key

01-88 Synchronizing the NE Time with the Standard NTP Server Time

01-89 Setting the Board Performance Threshold

01-90 Setting Performance Monitoring Parameters of a Board

01-91 Resetting Board Performance Registers

01-92 Restoring the NE Database from the SCC Board

01-93 Enabling Disabling Supervision on the Optical Layer

01-94 Switch the Active standby State Back to the Original State

01-95 Switching Protection on NMS

01-96 Checking Network-Wide Software Versions

01-97 Creating Fibers in the Synchronization Mode

01-98 Creating OCh Trails by Trail Search

01-99 Creating Single-Station Optical Cross-Connection

Related Documents