No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MA5600T, MA5603T, and MA5608T Hardware Description 24

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Intended Audience

This document describes the hardware used in the MA5600T/MA5603T/MA5608T, including the cabinet, subrack, chassis, board, cable, and electromechanical device.

This document is intended for:

  • Network planning engineers
  • Hardware installation engineers
  • Installation and commissioning engineers
  • Field maintenance engineers
  • Data configuration engineers
  • System maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Update History

Updates between document issues are cumulative. Therefore, the latest document issue contains all updates made in previous issues.

Updates in Issue 24 (2018-07-30)

Based on issue 23 (2018-04-27), the document is updated as follows:

Position

Description

Mapping Between Boards and Software Versions

Updated the description of the card support version.

Updates in Issue 23 (2018-04-27)

Based on issue 22 (2017-12-29), the document is updated as follows:

Position

Description

Upstream Interface Boards Comparison

Updated the description of the upstream interface boards comparison.

Updates in Issue 22 (2017-12-29)

Based on issue 21 (2017-09-30), the document is updated as follows:

Updates in Issue 21 (2017-09-30)

Based on issue 20 (2017-04-24), the document is updated as follows:

Position

Description

Board

Added the H801X2CK Board Description and H80DCSPE Board Description.

Included the V800R018C10 updates.

Updates in Issue 20 (2017-04-24)

Based on issue 19 (2016-10-30), the document is updated as follows:

Position

Description

Board

Added the H802X2CS Board Description and H80DSDPM Board Description.

Included the V800R018C00 updates.

Updates in Issue 19 (2016-10-30)

Based on issue 18 (2016-07-30), the document is updated as follows:

Position

Description

Board

Added the H80BVDMF Board Description.

Local Maintenance and Environment Monitoring Combo Cable

Updated the cable connector and pin assignments.

Updates in Issue 18 (2016-07-30)

Based on issue 17 (2016-04-29), the document is updated as follows:

Position

Description

Board

Added the H80DSDMM Board Description, H80BASPB Board Description and H80CASPB Board Description.

Mapping Between Boards and Software Versions

Updated the description of the card support version.

Power Consumption and Maximum Frame Size of Boards

Added the note for the power consumption of the board.

Included the V800R017C00 updates.

Updates in Issue 17 (2016-04-29)

Based on issue 16 (2015-09-30), the document is updated as follows:

Position

Description

Board

Added the H80BASPB Board Description, H80CASPB Board Description and H80DSDMM Board Description.

Mapping Between Boards and Software Versions

Optimized the description of the card support version.

Updates in Issue 16 (2015-09-30)

Based on issue 15 (2015-07-28), the document is updated as follows:

Position

Description

Board Dimensions

Added the dimension of MPWE board.

H801MCUD1 Board Description

Added the pin assignment of the BITS/TOD port of H801MCUD1 board.

Configuration

MA5600T IEC Service Subrack supports the H802MABH backplane.

Power Distribution Principle

Added the MPWE board.

120-ohm Clock Cable

Added the pin assignment of the 120-ohm Clock Cable.

Updates in Issue 15 (2015-07-28)

Based on issue 14 (2015-04-30), the document is updated as follows:

Position

Description

Board

The ETSI service subrack supports a new backplane H803MABC.

SCU Boards Comparison

The GE/10GE upstream ports of the H801SCUH and H801SCUV boards support automatic switching for remote software commissioning using GE upstream transmission.

Included the V800R016C00SPC100 updates.

Updates in Issue 14 (2015-04-30)

Based on issue 13 (2015-03-30), the document is updated as follows:

Included the V800R016C00 updates.

Updates in Issue 13 (2015-03-30)

Based on issue 12 (2015-01-19), the document is updated as follows:

Position

Description

Upstream Interface Board (GIU)

Universal Interface Board (GPIO)

Updated the description of the upstream interface board and universal interface board.

Board

Added the H80AVCPD Board Description and H80AVCPM Board Description.

Updates in Issue 12 (2015-01-19)

Based on issue 11 (2014-11-25), the document is updated as follows:

Position

Description

Mapping Between Boards and Software Versions

  • Modified the H801GICF replacement relationship.
  • Modified the software version supported by the H806CCPE board.

Included the V800R015C10SPC100 updates.

Updates in Issue 11 (2014-11-25)

Based on issue 10 (2014-07-30), the document is updated as follows:

Position

Description

Board

Added the H802SCUB Board Description, H801MPWE Board Description, H806CAME Board Description.

Board Configuration(MA5600T/MA5603T)

Modified the H80BADPE and H80BVDPE boards supported by the H801SCUF control board.

Included the V800R015C10 updates.

Updates in Issue 10 (2014-07-30)

Based on issue 09 (2014-04-30), the document is updated as follows:

Position

Description

Board

Added the H801SCUK Board Description.

Cabinet

Optimized the description of cabinets.

Board

Optimized the description of boards, including panel appearance and LED status.

Included the V800R015C00SPC100 updates.

Updates in Issue 09 (2014-04-30)

Based on issue 08 (2013-12-18), the document is updated as follows:

Position

Description

Board

Added the boards: H807GPBH Board Description, H805GPFD Board Description, H806CCPE Board Description, H806VCPE Board Description, H806VPGA Board Description, H801XGBD Board Description.

Optical and Electrical Module

Added the FE/GE Adaptive Optical Module.

Added an one-channel one-fiber bi-directional FE optical module in FE Optical Module.

Power Consumption and Maximum Frame Size of Boards

The power consumption and maximum frame size of boards are all introduced in Power Consumption and Maximum Frame Size of Boards. Parameter MTU is modified to Maximum Frame Size. Parameter Maximum Frame Size indicates the maximum frame transmission capability of a board.

Control Board (SCU)

Control Board (MCU)

Optimized the LED status description of control boards.

ADSL2+ Service Board

VDSL2 Service Board

SHDSL Service Board

Added the DC block in the working principle figures of xDSL boards.

Included the V800R015C00 updates.

Updates in Issue 08 (2013-12-18)

Based on issue 07 (2013-11-15), the document is updated as follows:

Position

Description

Board Configuration(MA5608T)

Added the H802GPBD, H805VDRD boards in Board Configuration(MA5608T).

Mapping Between Boards and Software Versions

The Out of Production information is replaced by Life Cycle Status information in Mapping Between Boards and Software Versions. The out of production information in the board description is deleted. Please query the information in Mapping Between Boards and Software Versions.

Updates in Issue 07 (2013-11-15)

Based on issue 06 (2013-10-30), the document is updated as follows:

Position

Description

Board Configuration(MA5600T/MA5603T)

Modified the mapping between some boards and versions.

Optimized the description.

Updates in Issue 06 (2013-10-30)

Based on issue 05 (2013-09-18), the document is updated as follows:

Position

Description

Comparison Between SPU Service Processing Boards

Added the comparison of SPU boards.

GE Optical/Electrical Module

Optimized the description.

Updates in Issue 05 (2013-09-18)

Based on issue 04 (2013-09-12), the document is updated as follows:

Position

Description

Board

Added the boards: H801CKMD, H802OPGE Board Description, H801SPUC Board Description, H802SHGM Board Description.

Included the V800R013C10 updates.

Updates in Issue 04 (2013-09-12)

Based on issue 03 (2013-07-25), the document is updated as follows:

Position

Description

Mapping Between Boards and Software Versions

Modified the mapping between some boards and versions.

Appearance of subracks

Deleted the notes below the figures of subrack appearance.

Updates in Issue 03 (2013-07-25)

Based on issue 02 (2013-04-30), the document is updated as follows:

Included the V800R013C00SPC100 updates.

Position

Description

Appearance of cabinets

Added appearance description of cabinets.

Parameters of subracks and chassises

Modified the power consumption of service subracks and chassises.

Work temperature of boards

Added the description of work temperature of boards.

H806VPEA Board Description

Added the power consumption of H806VPEA board.

Mapping Between Boards and Software Versions

Modified the mapping between some boards and versions.

Board

  • Optimize the comparison of similar boards. Some software specifications are added.
  • Optimize the board description. The figures of external connections and internal principle are combined as one figure.

Updates in Issue 02 (2013-04-30)

Based on issue 01 (2013-03-15), the document is updated as follows:

Included the V800R013C00 updates.

Updates in Issue 01 (2013-03-15)

This issue is the first official release.

The hardware description of V800R008C01 and later versions is integrated to facilitate query of hardware support and implementation for various versions.

Mapping Between Boards and Software Versionsis added to describe Software Versions Supported by This Board, Out of Product or Not, and Substitution Relationship.

Included the V800R011C00SPC102 updates.

Download
Updated: 2018-08-22

Document ID: EDOC1000060621

Views: 22059

Downloads: 2130

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next