About This Document
Purpose
This document describes the CX710 40GE converged switch module of the E9000 server in terms of its features, installation, removal, and configuration.
Intended Audience
This document is intended for:
- Technical support engineers
- Installation and commissioning engineers
- Field maintenance engineers
- System maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Issue |
Date |
Description |
|---|---|---|
10 |
2018-09-20 |
This issue is the tenth official release. |
09 |
2018-03-30 |
This issue is the ninth official release. |
08 |
2017-09-14 |
This issue is the eighth official release. |
07 |
2017-03-27 |
This issue is the seventh official release, and includes the following changes: Added product model descriptions to 2.2 Appearance. |
06 |
2016-08-31 |
This issue is the seventh official release. |
05 |
2016-03-31 |
This issue is the fifth official release, and includes the following changes:
|
04 |
2015-11-09 |
This issue is the fourth official release, and includes the following changes: Added the long-term storage temperature and humidity to 2.9 Technical Specifications. |
03 |
2015-07-17 |
This issue is the third official release, and includes the following changes: The reference to the throughput is added to 2.9 Technical Specifications. |
02 |
2015-03-20 |
This issue is the second official release, and includes the following changes: The table Supported Pluggable Modules and Cables in 2.8 Software and Hardware Compatibility is updated. |
01 |
2015-02-16 |
This issue is the first official release. |
Previous
