No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

XH620 V3 Server Node V100R003 User Guide 12

This document describes the appearance, functions, and structure of the XH620 V3, and how to install, remove, and configure the XH620 V3, and how to install the OS supported by the XH620 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Overview

This document describes the appearance, functions, and structure of the XH620 V3, how to install, remove, and configure the XH620 V3, and how to install an OS supported by the XH620 V3.

The document provides guidance on how to replace internal components, configure boot options, redundant array of independent disks (RAID) properties, and IP address for the intelligent baseboard management controller (iBMC) of the server, log in to the web user interface (WebUI), and install an OS.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 12 (2018-09-05)

Optimized some figure display issues.

Issue 11 (2018-08-28)

Type

Description

Add

Added description about label plate positions and product serial numbers. See Front Panel (2 x 2.5-inch Hard Disks + 1 PCIe Card), Front Panel (4 x 2.5-inch Hard Disks), Front Panel (Two Built-in 3.5-inch Hard Disks), and SN.

Issue 10 (2018-06-16)

Type

Description

Modify

Changed miniSSD to SATADOM based on the naming rules.

Issue 09 (2018-03-09)

Type

Description

Modify

Modified iBMC/BIOS configuration import and export description when the mainboard is replaced. For details, see Removing the Mainboard and Installing the Mainboard.

Issue 08 (2017-12-13)

Type

Description

Modify

Modified configuration descriptions of front hard disks. For details, see Overview.

Issue 07 (2017-07-05)

Type

Description

Modify

Modified environment parameter description. For details, see Technical Specifications.

Add

Added description about heat dissipation restraints of different CPU models and about 128 GB DIMMs. For details, see Technical Specifications, Hardware Structure (2 x 2.5-inch Front Hard Disks + 1 PCIe Card), Hardware Structure (4 x 2.5-inch Front Hard Disks) and Hardware Structure (Two Built-in 3.5-inch Hard Disks).

Issue 06 (2017-04-07)

Type

Description

Add

Added the description of restoring the default iBMC password. For details, see Mainboard Layout.

Modify

Deleted the description of support for flexible NICs with two GE and two 10GE ports. For details, see Front Panel and Physical Structure.

Issue 05 (2017-01-13)

This issue is the fifth official release, which incorporates the following changes.

Type

Description

Add

Added the description of PCIe slot distribution. For details, see Front Panel (2 x 2.5-inch Hard Disks + 1 PCIe Card).

Modify

Modified the indicator status description of NVMe PCIe SSDs. For details, see Installing an NVMe PCIe SSD.

Issue 04 (2016-07-18)

This issue is the fourth official release, which incorporates the following changes.

Type

Description

Add

Added the description about the flexible NIC that provides one 56G IB port and NVMe PCIe SSD operations. For details, see Removing an NVMe PCIe SSD and Installing an NVMe PCIe SSD.

Issue 03 (2016-04-01)

This issue is the third official release, which incorporates the following changes.

Type

Description

Add

Added description about M.2 SATA SSD card operations. For details, see Removing an M.2 SATA SSD Card and Installing an M.2 SATA SSD Card.

Issue 02 (2015-11-10)

This issue is the second official release.

Issue 01 (2015-07-13)

This issue is the first official release.

Translation
Download
Updated: 2018-09-06

Document ID: EDOC1000079253

Views: 7543

Downloads: 666

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next