Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

24

2018-09-17

Added the description about the information that will be lost after mainboard replacement and needs to be configured again after the mainboard is replaced. Added the link for importing and exporting the BMC configuration file to sections Installing the Mainboard and Removing the Mainboard.

23

2018-08-17

Added the procedure for removing a holding rail. For details, see Removing the Server.

22

2018-07-12

Added procedures for removing and installing an SD card and related precautions. For details, see Removing an SD Card Board and Installing an SD Card Board.

21

2018-05-29

Changed LOM and NIC to flexible NIC.

20

2018-05-10

Modified fan module removal and installation procedures. For details, see Removing a Fan Module and Installing a Fan Module.

19

2018-04-10

Modified RAID controller card supercapacitor removal and installation procedures. For details, see Removing the Supercapacitor (RAID Controller Card), Removing the Supercapacitor (Standard RAID Controller Card), Installing the Supercapacitor (RAID Controller Card), Installing the Supercapacitor (Standard RAID Controller Card).

18

2018-02-22

Added the description about how to import and export the iBMC/BIOS configuration information after the mainboard is replaced. For details, see 7.41 Removing the Mainboard and 7.42 Installing the Mainboard.

17

2018-01-15

Added the locations of dual SD cards. For details, see 7.47 Removing an SD Card.

Added the description about the left and right mounting ears. For details, see 2.2 Appearance.

16

2017-12-12

Modified server installation environment requirements. For details, see 3.2 Installation Environment.

Added steps about removing and installing the mezzanine SD card. For details, see 7.47 Removing an SD Card and 7.48 Installing an SD Card.

Added fan module numbers. For details, see 7.15 Removing a Fan Module.

15

2017-10-26

Added the description about Dual-SD cards and SD card module. For details, see 2.5 Physical Structure.

14

2017-09-26

Modified the logical structure. For details, see 2.8 Logical Structure.

13

2017-08-15

Optimized chapters about parts replacement. For details, see 7 Replacing Parts.

12

2017-07-20

Added the description about 128 GB DIMMs. For details, see 2.5 Physical Structure and 2.11 Product Specifications.

11

2017-06-20

Added internal cable BOMs. For details, see 2.7 Internal Cabling.

10

2017-05-10

Modified the mainboard layout description. For details, see 2.6 Mainboard Layout.

09

2017-04-05

Modified front bezel description. For details, see 7.3 (Optional) Removing the Front Bezel and 7.4 (Optional) Installing the Front Bezel.

08

2017-03-03

Modified the indicator status description of NVMe PCIe SSDs. For details, see 7.8 Installing an NVMe PCIe SSD.

07

2017-01-24

Added operations for replacing the front bezel. For details, see 7.3 (Optional) Removing the Front Bezel and 7.4 (Optional) Installing the Front Bezel.

06

2016-11-29

Added NVMe PCIe SSD operations. For details, see 7.7 Removing an NVMe PCIe SSD and 7.8 Installing an NVMe PCIe SSD.

05

2016-07-30

Added security description. For details, see 1 Safety Instructions.

Added the description of the Software and Configuration Utility. For details, see 6 Software and Configuration Utility.

04

2016-03-30

Added the procedures for removing and installing an M.2 SATA SSD card. For details, see 7.57 Removing an M.2 SATA SSD Card and 7.58 Installing an M.2 SATA SSD Card.

03

2015-12-21

Modified the mainboard layout description. For details, see 2.6 Mainboard Layout.

02

2015-12-16

Added product specifications. For details, see 2.11 Product Specifications.

01

2015-07-15

This issue is the first official release.