X6000 Server Node iBMC (Earlier Than V250) User Guide 25

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the Intelligent Baseboard Management Controller (iBMC) server management software. It includes the following:

  • Functions and features of the iBMC
  • iBMC web user interface (WebUI)
  • iBMC command line interface (CLI)
  • Commands used on the iBMC

This document applies to X6000 XH310 V3 and XH321 V3 server nodes.

Intended Audience

This document is intended for:

  • Server installation engineers
  • Server maintenance engineers
NOTE:
  • This document describes only the commands used to deploy and maintain Huawei servers. It does not include the commands for server manufacturing, assembling, and factory inspection and repair.
  • This document does not include the commands for engineering implementation or fault location. Inappropriate use of these commands may result in device faults or service interruption. To obtain information about these commands, contact Huawei technical support.

This document is for the person who installs, manages, and troubleshoots servers. It is assumed that you are qualified in servicing servers and trained in recognizing hazards in products with hazardous energy levels.

Change History

Updates between document issues are cumulative. Therefore, the latest document issue contains all updates made in previous issues.

Issue 25 (2018-06-07)

Updated Restoring Default iBMC Settings and added section Logging In to a Server Using the Independent Remote Console (Redhat).

Issue 24 (2018-05-30)

Updated Restoring Default iBMC Settings.

Issue 23 (2018-03-29)

Updated Power Control, Energy Saving Settings, and Setting the Disk Locate Indicator Status (locate).

Issue 22 (2018-02-28)

Updated U-Boot Command List.

Issue 21 (2018-02-11)

Updated Table 2-38.

Issue 20 (2017-12-28)

Optimized the "Local Users" section.

Issue 19 (2017-11-13)

Updated the description of black box installation methods and usage guidelines.

Issue 18 (2017-08-14)

This issue is the eighteenth official release.

Issue 17 (2017-06-30)

This issue is the seventeenth official release.

Issue 16 (2017-05-20)

This issue is the sixteenth official release.

Issue 15 (2017-04-07)

This issue is the fifteenth official release.

Issue 14 (2017-03-10)

This issue is the fourteenth official release.

Issue 13 (2017-02-27)

This issue is the thirteenth official release.

Issue 12 (2017-02-20)

This issue is the twelfth official release.

Issue 11 (2017-01-05)

This issue is the eleven official release.

Issue 10 (2016-10-27)

This issue is the tenth official release.

Issue 09 (2016-09-10)

This issue is the ninth official release.

Issue 08 (2016-03-20)

This issue is the eighth official release.

Issue 07 (2016-01-07)

This issue is the seventh official release.

Issue 06 (2015-11-10)

This issue is the sixth official release.

Issue 05 (2015-07-13)

This issue is the fifth official release.

Issue 04 (2015-03-20)

This updated document is available for all rack servers.

Issue 03 (2014-12-24)

The product names are changed.

Issue 02 (2014-10-25)

This issue is the second official release.

Issue 01 (2014-04-20)

This issue is the first official release.

Translation
简体中文
Download
Updated: 2018-06-11

Document ID: EDOC1000081651

Views: 5791

Downloads: 183

Average rating:
Related Documents
Share
Previous Next