OceanStor 2200 V3&2600 V3 Storage System V300R005 Command Reference 04

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Intended Audience

Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Content Conventions

The purchased products, services, and features are stipulated by the commercial contract made between Huawei and the customer. All or partial products, services and features described in this document may not be within the purchased scope or the usage scope. Unless otherwise agreed by the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees, or representations of any kind, either express or implied

As part of an effort to improve and enhance the performance and capabilities of its product line, Huawei Technologies Co., Ltd. from time to time releases revisions of its hardware and software. Therefore, some functions described in this manual may not be supported by all revisions of the software or hardware currently in use. For the most up-to-date information on product features, refer to your product release notes.

If a product does not function as described in this manual, please contact your Huawei Technologies Co., Ltd. technical support.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 04 (2018-05-30)

This is the fourth official release.

Modified commands:
  • show controller general

Issue 03 (2017-07-31)

This is the third official release.

Added commands:
  • swap hyper_metro_pair
  • show service ndmp_tape
Modified commands:
  • show storage_engine
  • show storage_pool general
  • show notification trap
  • change system timezone
  • export configuration_data
  • change system write_through_policy
  • change fs_snapshot schedule
  • delete fs_snapshot schedule
  • show disk_domain securevideo
  • delete remote_replication
  • change system time
  • create fs_snapshot schedule
  • change smartqos_policy general
  • create smartqos_policy
  • show lun dedup_compress
  • change system secure_compliance_clock
  • show system secure_compliance_clock
  • create storage_pool
  • create lun
  • add notification trap
  • add logical_port ipv6_route
  • add logical_port ipv4_route
  • change logical_port failback
  • show logical_port general
  • show logical_port count
  • delete logical_port general
  • remove logical_port ipv4_route
  • show logical_port route
  • add failover_group vlan_port
  • show vlan count
  • change failover_group general
  • create failover_group general
  • add failover_group eth_port
  • add failover_group bond_port
  • show failover_group count
  • show failover_group member
  • show failover_group general
  • show bond_port_count
  • show smartqos_policy file_system
  • change antivirus_scan policy
  • create cache_partition
  • delete cache_partition
  • change cache_partition general
  • show cache_partition general
  • add cache_partition lun
  • remove cache_partition lun
  • show cache_partition lun
  • add cache_partition file_system
  • remove cache_partition file_system
  • show cache_partition file_system
  • show performance cache_partition
  • show remote_replication available_file_system
  • change remote_replication second_fs_access
  • change remote_replication file_system
  • add smartqos_policy file_system
  • remove smartqos_policy file_system
  • change user_ssh_auth_info general
  • change mm_user password
  • show certificate general
  • change certificate password
  • change system server_port
  • change mm_user user_name
  • change certificate prewarning_time
  • import certificate
  • export certificate
  • change system permission_hardening
  • show system permission_hardening
  • show performance cifs_share
  • show performance cifs_service
  • show performance smb2
  • show performance smb1
  • show common_config cifs
  • change common_config cifs
  • change homedir general
  • change homedir enabled
  • show homedir general
  • show smart_cache_partition file_system
  • remove smart_cache_partition file_system
  • add smart_cache_partition file_system
  • create antivirus_scan policy
  • create logical_port bond
  • remove logical_port ipv6_route
  • change logical_port general
  • create logical_port eth
  • create logical_port vlan
  • show bond_port
  • show fs_snapshot schedule
  • add port ipv4_route
  • remove port ipv6_address
  • add port ipv6_route
  • remove port ipv4_address
  • delete vlan general
  • create vlan general
  • show vlan general
  • change domain ldap_config
  • delete lun_migration
  • change storage_pool general
  • add mirror_lun remote_mirror_copy
  • add mirror_lun local_mirror_copy
  • change service nfs
  • show system config_model
  • show service ftp
  • import ssh_host_key_file
  • show performance file_system
  • change vlan general
  • change ntp_server config
  • change system ntp
  • show port general
  • change ssl_certificate passphrase
  • change user_lock
  • change user_unlock
  • change logical_port failover_group
  • delete failover_group general
  • remove failover_group vlan_port
  • remove failover_group eth_port
  • remove failover_group bond_port
  • change lun
  • import ssl_certificate
  • change user_session number
  • delete notification trap
  • change user
  • change notification trap
Delete commands:
  • change system permission_hardening
  • show system permission_hardening

Issue 02 (2016-09-30)

This is the second official release.

Added commands:
  • show logical_port route
  • add failover_group vlan_port
  • show vlan count
  • change vlan general
  • delete vlan general
  • change failover_group general
  • create failover_group general
  • remove failover_group eth_port
  • delete failover_group general
  • add failover_group eth_port
  • add failover_group bond_port
  • show failover_group count
  • show failover_group member
  • show failover_group general
  • show bond_port_count
  • show bond_port
  • show port general
  • change notification syslog
  • show certificate general
  • change certificate password
  • show file notification
  • show system server_port
  • change system server_port
  • delete file
  • remove notification receiver
  • show notification sms
  • show notification email
  • add notification receiver
  • change notification email
  • show notification syslog
  • show mm_user general
  • change mm_user user_name
  • show ldap configuration
  • create ldap configuration
  • change ldap configuration
  • create ldap authconfig
  • change certificate prewarning_time
  • show audit_strategy
Modified commands:
  • export cli history
  • change mm_user password
  • show alarm
  • change service ftp
  • change service http
  • change snmp usm
  • add snmp usm
  • change lun
  • change snmp community
  • change persistent_mirror silence_time
  • change clone split
  • show performance file
  • change bond_port general
  • change notification email_extend
  • change remote_replication general
  • change logical_port general
  • remove logical_port ipv6_route
  • create logical_port eth
  • remove failover_group vlan_port
  • create logical_port vlan
  • create vlan general
  • show vlan general

Issue 01 (2016-04-30)

This is the first official release.

Translation
简体中文
Download
Updated: 2018-06-04

Document ID: EDOC1000106139

Views: 8673

Downloads: 93

Average rating:
Related Documents
Share
Previous Next