No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Installation Guide 07

"This document describes hardware installation of the storage system, covering the followingparts: precautions and preparations, installation flow, cabling, installation check, power-on, andstatus indicator check."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Intended Audience

This document describes hardware installation of a storage system – precautions and preparations, installation procedure, cabling, installation check, power-on, and grounding.

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Conventions

As part of an effort to improve and enhance the product performance and capabilities, Huawei Technologies Co., Ltd. periodically releases revisions of the hardware and software. Therefore, some functions described in this document may not be supported by all versions of the software or hardware currently in use. For the most up-to-date information about product features, refer to the product release notes.

If a product does not function as described in this document, contact Huawei technical support.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes in earlier issues.

Issue 07 (2018-08-30)

This is the seventh official release.

Optimized some description.

Issue 06 (2018-05-30)

This is the sixth official release.

Added the description about how to use the optical fiber binding tape.

Issue 05 (2018-02-05)

This is the fifth official release.

Optimized some description.

Issue 04 (2017-07-31)

This is the fourth official release.

Added the description of PDU in Connecting AC Power Cables.

Issue 03 (2017-03-30)

This is the third official release.

Added the Follow-up Procedure to (Optional) Checking and Setting the Working Mode of the SmartIO Interface Module.

Issue 02 (2016-09-30)

This is the second official release.

  • Added the Connecting two disk enclosures to the 2200 V3 (single controller) figure to Connecting Disk Enclosures.
  • Added Removing SAS Cables to Connecting Disk Enclosures.
  • Added Changing IP Addresses of Management Network Ports Using DeviceManager.

Issue 01 (2016-04-30)

This is the first official release.

Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000106143

Views: 15067

Downloads: 558

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next