About This Document
Intended Audience
This document describes the appearance, functions, and structure of the KunLun 9032 server. It also describes how to install and remove the server and its components, and how to perform basic configuration.
This document provides guidance for you to use the 9032 server.
This document is intended for:
- Technical support engineers
- Maintenance engineers
Important Notice
If your product model is 9032 L, refer to the KunLun 9016 Product Documentation at http://support.huawei.com/enterprise/productNewOffering?idAbsPath=7919749|9856522|21431182|21283284&pid=21283284&productname=9016&lang=en.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices, and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 10(2018-06-30)
The issue is the tenth official release, to which the iMS is added.
Issue 09(2018-04-13)
The issue is the ninth official release, to which description of resource expansion enclosure (REE) is added.
Issue 08 (2017-12-25)
The issue is the eighth official release, to which the maximum power consumption in typical configuration value is modified.
Issue 07 (2017-10-28)
The issue is the seventh official release, in which the back I/O module (BIO) names are modified following the same naming rule and the description of installing and removing front I/O module (FIO) internal components are updated.
Issue 06 (2017-05-12)
The issue is the sixth official release, in which the description of the FIO-B is added.
Issue 05 (2017-03-09)
The issue is the fifth official release, in which the KunLun logo is modified.
Issue 04 (2017-01-16)
The issue is the fourth official release, in which the following sections are modified:
- Installing a Hot-Swappable PCIe Card
- Installing a Non-Hot-Swappable PCIe Card
- Logging In to the CMC WebUI
- Installing a DIMM
Issue 03 (2016-11-29)
This issue is the third official release, which incorporates the following change:
The hot swap function is added.
Issue 02 (2016-10-19)
This issue is the second official release, which incorporates the following change:
The description of the 9032 L server is added.
Issue 01 (2016-01-25)
This issue is the first official release.
Previous
