No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration File Parameter Description

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the parameters in the configuration files of the eSpace 7910&7950 IP phones.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preface

Preface

Overview

This document describes the parameters used in the configuration file of eSpace 7910 and eSpace 7950.

Intended Audience

This document is intended for:
  • Technical support engineers
  • Maintenance engineers
  • Agent engineers
  • Enterprise administrators

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 11 (2018-11-07)

This issue is the tenth official release, and includes the following changes:

Updated the parameters about network security.

Issue 10 (2018-10-15)

This issue is the ninth official release, and includes the following changes:

Updated the parameters about TR-069 NMS module and number of calls per line.

Issue 09 (2018-07-13)

This issue is the eighth official release, and includes the following changes:

Updated the parameters about phone volume.

Issue 08 (2018-04-28)

This issue is the seventh official release, and includes the following changes:

Added the parameters about # escape, BLF button, device deployment configuration, media, user access network function enablement and ringtone configuration for common users.

Updated the parameters about programmable button configuration status, call service configuration status, environment, TR-069 NMS module, country code for signal tones and SIP signaling.

Issue 07 (2018-03-22)

This issue is the sixth official release, and includes the following changes:

Updated the parameters about phone lock.

Issue 06 (2018-03-10)

This issue is the fifth official release, and includes the following changes:

Added the parameters about SIP signaling, device information, unified authentication, internet gateway device information, certificates name and IP.

Updated the parameters about management server.

Issue 05 (2017-12-30)

This issue is the fourth official release, and includes the following changes:

Added the parameters about network management system type, STUN server, IP phone network, SRTP encryption mode and anonimize DTMF number.

Updated the parameters about button type for programmable buttons.

Issue 04 (2017-11-30)

This issue is the third official release, and includes the following changes:

Added the parameters about user service parameter setting switch and EHS control.

Issue 03 (2017-06-30)

This issue is the second official release, and includes the following changes:

Added the parameters about programmable button configuration status and call service configuration status.

Issue 02 (2017-04-17)

This issue is the first official release, and includes the following changes:

Added the parameters about network management system type, administrator user configuration and user name mode used in authentication.

Updated the parameters about media capability priority, SIP signaling and directory configuration.

Issue 01 (2016-12-28)

This issue is the first office application (FOA) release.

Translation
Download
Updated: 2018-11-15

Document ID: EDOC1000129165

Views: 3818

Downloads: 158

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next