No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.

This document is applicable to the following product models.

Product Series

Product Model

OceanStor 18000 V3 series

OceanStor 18500 V3/18800 V3

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 07 (2018-07-30)

This is the seventh official release. The updates are as follows:

Added commands:
  • show ldap_server general
  • change ldap_server
  • show rsf upgrade_check_info
  • export file_system_tier_info
  • swap dr_star_member remote_replication
  • show nfs nfsv41_session_forechannel
  • change nfs nfsv41_session_forechannel
  • change disk_domain disk_log
  • show disk_domain disk_log
  • change lun_takeover enhance_switch
  • show nas_mem slot_info
  • show upgrade port_failover_switch
  • change upgrade port_failover_switch
  • add snapshot_group snapshot
  • remove snapshot_group snapshot
  • show takeover_switch global_enhanced_masquerading_switch
  • show nfs nfsv41_stat
  • clear nfs nfsv41_stat
  • rst_svc_ctl.sh
  • show nfs nfsv41_err_stat
  • show disk_domain set_disk_group
  • change takeover_switch global_enhanced_masquerading_switch
  • show nas_log function_debug_info
  • change nas_log function_debug_info
  • proto nas_vfs show_file_by_path
  • change nfs nfsv4_idmap_numerical
  • show nfs nfsv4_idmap_numerical
  • change tgt_switch vxvm_dmp_feature
  • memstat.sh
  • show tgt_switch vxvm_dmp_feature
  • change hyper_metro_consistency_group general*
  • change hyper_metro_pair general*
  • show client top
  • show file top
  • show file_system top
  • show disk_group
  • change remote_replication startup
  • change consistency_group startup
  • scsi showvaaistat
  • scsi showreportlun
  • ntpq
  • rephc showtntstatus
  • rephc queryarrayinfo
  • rephc queryisoinfo
  • rephc showalltntpairlock
  • rephc shownastaskinfo
  • change nfs nfsv41_session_trunking_support
  • show nfs nfsv41_session_trunking_support
Modified commands:
  • show ddp domain_info
  • delete quorum_server_link db
  • pal rescue showtaskinfo
  • change disk_domain format_parallel
  • quota show volhang
  • delete configuration_log
  • delete quorum_server db
  • quota show poolhang
  • change fdsa switch
  • eam alarm
  • delete clone_db
  • delete clone_dcl
  • delete clone_rsstype
  • upgradesystem
  • show dedup_compress_lun general
  • Qos show vol_poss
  • show cache_partition ratio
  • show disk_domain format_mode
  • change disk_domain format_mode
  • qos show io_class_timerecord
  • ckgiof showincon
  • ckgiof ckgtrans
  • ms showdisk
  • kvdb calcucrc
  • nmgr showinst
  • spa extlist
  • spa crccheck
  • qos show io_class_schdinfo
  • Qos show io_class_param
  • change storage_pool repair_lun
  • bgr showcounter
  • change logical_port failover_switch
  • sysforcepoweron
  • change cluster controllers
  • test logical_port failover
  • change fdsa check_item_switch
  • change logical_port failover
  • change cache_partition write_policy
  • upgrade_clearflag.sh
  • eam showevent
  • change iod schedule_information
  • show nfs nfsv4_opened_files
  • create upgrade session
  • arb showall
  • arb showtrace
  • change cache_partition ratio
  • change cifs keep_alive_switch
  • change cifs keep_idle
  • change cifs log_level
  • change cifs reserve_bit
  • change cifs rtt_switch
  • change cifs smb3_switch
  • change file_system amend
  • change file_system check
  • change file_system force_expand
  • change file_system min_fs
  • change file_system vstore
  • change fs_clone split_concurrent_num
  • change fs_clone split_concurrent_size
  • change fs_clone split_force
  • change fs_snapshot check_strategy
  • change remote_replication cfg_switch
  • change service ndmp_delete_snapshot
  • change space check_space_consistency
  • change space rescue_config
  • change statistics_switch ftp
  • change system external_tlv_channel
  • clear cifs connection
  • clear cifs fp_record
  • clear cifs server_stat
  • clear cifs smb1_stat
  • clear cifs smb2_stat
  • clear fs_snapshot residual_clone_ref
  • clear performance ndmp
  • clear pim stat
  • delete file_system force
  • delete file_system scrub_error_info
  • delete hyper_metro_pair dump
  • disklog repairio
  • disklog showobj
  • export file_system dirtydata
  • mr showblkmgr
  • mr showckgmgr
  • mr showfilestatus
  • mr showflowcnt
  • mr showloginfo
  • mr showstatus
  • mr showtreehandle
  • mrm showcounter
  • mrr repairextentcountshow
  • mrr showflow
  • mrr showrpoolaction
  • ms showscan
  • ms showtask
  • show antivirus mempool
  • show antivirus scan
  • show cifs connection
  • show cifs fp_record
  • show cifs reserve_bit
  • show cifs rtt_switch
  • show cifs server_info
  • show cifs server_stat
  • show cifs smb2_stat
  • show cifs smb3_switch
  • show dha judgeboundary
  • show dha judgeproportion
  • show dha modelswitch
  • show disk slowthreshold
  • show disk_reliability_policy slow_disk_detect
  • show file_system check
  • show file_system dirtydata
  • show file_system min_fs
  • show file_system rescue
  • show file_system scrub
  • show file_system scrub_error_info
  • show fs_clone split
  • show fs_clone split_concurrent_num
  • show fs_clone split_concurrent_size
  • show fs_snap_control action
  • show fs_snap_control all_task_info
  • show fs_snap_control code
  • show fs_snap_control last_task_id
  • show fs_snap_control status
  • show fs_snap_control task
  • show fs_snapshot resource
  • show hypervault_backup general
  • show hypervault_event general
  • show hypervault_restore general
  • show nfs server_info
  • show performance ndmp
  • show pim stat
  • show protocol debug
  • show remote_replication cfg_switch
  • show space check_space_consistency
  • show space dmn_info
  • show space statistic_info
  • show statistic nfs_connection
  • show statistics ftp_connection
  • show statistics ftp_connection_count
  • show statistics_switch ftp
  • show system external_tlv_channel
  • sio show slowthresh
  • spa showqueueinfo
  • ss showtask
  • ssdc show bg
  • ssdc show copyspeed
  • ssdc show copystate
  • ssdc show mem
  • ssdc show objDelBlkDetail
  • ssdc show pt
  • ssdc show ssd
  • ssdc show st basic
  • ssdc show volCachedDataInfo
  • show logical_port failover_switch
  • delete fs_private_snapshot force
  • pair showcounter
  • change disk slowthreshold
  • change dha singlemodelconfig
  • change disk ak_auth_recover
  • change file_system switch
  • show file_system switch
  • change port enabled
  • show system configuration_log
  • change ddp limit_time
  • os_change_bayconfig.sh
  • show service ndmp_connection
  • show statistic ndmp_connection
  • change file_system scrub
  • change space global_config
  • show space global_config
  • change cifs share_cache
  • clear cifs share_cache
  • ccdb.sh
  • change cache destage_concurrent
  • show ftp stat
  • show ndmp stat
  • sshtoremoteExt
  • change disk_domain verify_pool_meta
  • show disk_domain verify_pool_meta
  • overload_ctrl show flowctrl_info
  • Qos show io_class_detail
  • help
  • ssdc show obj
  • sys showlockhandle
  • change logical_port failback
  • show smartqos_policy switch
  • change smartqos_policy function_enabled
  • change smartqos_policy switch
  • show smartqos_policy delay
  • show ldap_server general
  • change ldap_server
  • show rsf upgrade_check_info
  • export file_system_tier_info
  • swap dr_star_member remote_replication
  • show nfs nfsv41_session_forechannel
  • change nfs nfsv41_session_forechannel
  • change disk_domain disk_log
  • show disk_domain disk_log
  • change lun_takeover enhance_switch
  • change upgrade port_failover_switch
  • add snapshot_group snapshot
  • remove snapshot_group snapshot
  • show takeover_switch global_enhanced_masquerading_switch
  • rst_svc_ctl.sh
  • change nas_log function_debug_info
  • show fs_snapshot clone_ref
  • show cifs smb1_stat
  • change tgt_switch vxvm_dmp_feature
  • memstat.sh
  • change hyper_metro_consistency_group general*
  • change hyper_metro_pair general*
  • show disk_group
  • change file_system rescue

Issue 06 (2018-05-09)

This is the sixth official release. The updates are as follows:

Added commands:
  • poweroff enclosure
  • perf.sh
  • rst_svc_ctl.sh
  • change hyper_metro_pair general*
  • change hyper_metro_consistency_group general*
  • change lun_takeover enhance_switch
  • show upgrade port_failover_switch
  • change upgrade port_failover_switch
  • show hyper_metro_vstore_pair cfg_switch
  • show hyper_metro_pair cfg_switch
  • change hyper_metro_pair cfg_switch
  • change hyper_metro_vstore_pair cfg_switch
  • show hyper_metro_vstore_pair remaincfglog
  • xnetpal setnapisch
Modified commands:
  • show ddp mem_info
  • show ddp io_counter
  • show ddp meta_list
  • show ddp chunk_info
  • show ddp chunk_meta
  • show ddp ratio
  • change disk_domain verify_pool_meta
  • show disk_domain verify_pool_meta
  • change lun_cache force_destage
  • change omnilock open
  • change odx odx_enabled
  • cliget -d bbuinfo
  • cliget -d ledinfo
  • change verify_stripe config
  • cpy userinfo
  • delete quorum_server_link db
  • dcl counter
  • grain showAllocAlg
  • restore hotpatch
  • change disk_domain format_parallel
  • change ftds location
  • Qos show io_class_detail
  • show dlm resource_master
  • change smartqos_policy function_enabled
  • delete quorum_server db
  • devlun show verifystripeinfo
  • maint_debug_cli
  • show cache global
  • spacetx show
  • show cache blocked_page
  • show pair log_ctrl
  • volume show verifystripeinfo
  • volume showrescallstats
  • show smartqos_policy switch
  • show system force_write_back
  • show smartqos_policy delay
  • show system command_list
  • pair showqueueinfo
  • delete snapshot_rsstype
  • delete clone_db
  • delete clone_dcl
  • delete clone_rsstype
  • delete lun_migration_rsstype
  • delete lun_migration_dcl
  • delete lun_migration_db
  • change iscsi discover_multiport
  • show pair init_accessor
  • help
  • xrb showintermem
  • show dlm resource_proxy
  • change nfs nfsv3_readdir_buf
  • change nfs nfsv4_readdir_buf
  • show disk_domain format_mode
  • change disk_domain format_mode
  • scsi show reservation lun
  • change ccdb general
  • cgroup_manage.sh
  • setupsystem
  • cmm.sh
  • ckgiof showincon
  • ckgiof ckgtrans
  • ms showdisk
  • kvdb calcucrc
  • nmgr showinst
  • spa extlist
  • spa crccheck
  • os_upgrade_hotpatch.sh
  • change smartqos_policy switch
  • change system maintenance_ip
  • overload_ctrl show flowctrl_info
  • change storage_pool repair_lun
  • change remote_replication clear_difference
  • rm showmetaio
  • drvunf showiniioprofile
  • change verify_stripe enabled
  • drvunf showdetail
  • show system_disk upgrade_status
  • test logical_port failover
  • change fdsa check_item_switch
  • grain showAllocTree
  • spc showstatistic
  • change logical_port failover
  • change logical_port failback
  • change nfs nfsv3_forward_switch
  • show nfs nfsv3_forward_switch
  • show nfs nfsv4_opened_files
  • devlun showstepcount
  • create upgrade session
  • sys showgpoollock
  • false
  • erase
  • hiddr_test
  • arb showall
  • arb showtrace
  • cache show forcemirror
  • cache show prefetch
  • change cifs keep_alive_switch
  • change cifs keep_idle
  • change cifs log_level
  • change cifs reserve_bit
  • change cifs rtt_switch
  • change cifs smb3_switch
  • change controller dma_type
  • change cpu frequency
  • change dedup_lun scrub
  • change file_system amend
  • change file_system check
  • change file_system force_expand
  • change file_system isolate_object
  • change file_system min_fs
  • change file_system repair
  • change file_system vstore
  • change fsa open_lock
  • change fsa stat_switch
  • change hyper_metro_consistency_group link_status
  • change hyper_metro_pair full_sync_cfg
  • change hyper_metro_pair link_status
  • change hyper_metro_vstore_pair full_sync_cfg
  • change hyper_metro_vstore_pair link_status
  • change nas_log debug_switch
  • change nas_mem health_limit
  • change nfs nfsv3_readdirplus_support
  • change nfs nfsv4_idmap_support
  • change nfs recv_buf
  • change nfs rtt_switch
  • change nfs send_buf
  • change nfs stat_switch
  • change omnilock open
  • change omnilock rtt_switch
  • change pal async_delete
  • change pal clear_trunc_xattr
  • change pal rtt
  • change remote_replication full_sync_cfg
  • change remote_replication_vstore full_sync_cfg
  • change remote_replication_vstore link_status
  • change service ndmp_delete_snapshot
  • change shake_alarm general
  • change space check_space_consistency
  • change space config
  • change space grain
  • change space grain_extent_tree
  • change space grain_merge_tree
  • change space rescue_config
  • change spaceflow general
  • change spacetx timer
  • change spc rtt_switch
  • change statistics_switch ftp
  • change storage_pool repair_dedup_lun
  • change system external_tlv_channel
  • clear cifs connection
  • clear cifs fp_record
  • clear cifs server_stat
  • clear cifs smb1_stat
  • clear cifs smb2_stat
  • clear fsa operation_timeout
  • clear fsa request_stat
  • clear hyper_metro_consistency_group db
  • clear nfs connection
  • clear nfs nfsv3_lock
  • clear nfs nfsv3_lock_db
  • clear nfs nfsv3_nlm_stats
  • clear nfs nfsv3_stat
  • clear nfs nfsv4_dbuffer
  • clear nfs nfsv4_idmap_cache
  • clear nfs nfsv4_stat
  • clear nfs server_stat
  • clear nfs share_cache
  • clear omnilock brl
  • clear omnilock lock_client_stat
  • clear omnilock open
  • clear performance ndmp
  • clear pim stat
  • delete dedup_lun scrub_error_info
  • delete file_system force
  • delete file_system scrub_error_info
  • delete hyper_metro_domain db
  • delete hyper_metro_pair db
  • delete hyper_metro_pair dcl
  • delete hyper_metro_pair log
  • delete hyper_metro_pair rsstype
  • delete hyper_metro_vstore_pair db
  • delete hyper_metro_vstore_pair rss
  • delete hypervault dcl
  • delete hypervault rss_type
  • delete hypervault service_db
  • delete hypervault_db general
  • delete omnilock open
  • delete remote_replication_vstore db
  • delete remote_replication_vstore rss
  • delete space grain_extent_tree
  • disklog repairio
  • disklog showobj
  • drvsascbb getroutelist
  • drvsascbb readreg
  • epl linkq
  • epl versionservice
  • export file_system dirtydata
  • mr showblkmgr
  • mr showckgmgr
  • mr showfilestatus
  • mr showflowcnt
  • mr showloginfo
  • mr showstatus
  • mr showtreehandle
  • mrm showcounter
  • mrr repairextentcountshow
  • mrr showflow
  • mrr showrpoolaction
  • ms showscan
  • ms showtask
  • pal ctrl minloadinfo
  • remove hyper_metro_consistency_group member
  • rep showlastfailtrace
  • rephc querypair
  • rephc showAllCgLockInfo
  • rephc showAllPairLockInfo
  • rephc showCgLockInfo
  • rephc showluntopair
  • rephc showPairLockInfo
  • rephv lock show
  • rephv logzone show
  • rephv mutex show
  • rephv nego show
  • rephv policy show
  • rephv vault show
  • scsi show tpgstatus -l lunID
  • show antivirus mempool
  • show antivirus scan
  • show cifs connection
  • show cifs fp_record
  • show cifs reserve_bit
  • show cifs rtt_switch
  • show cifs server_info
  • show cifs server_stat
  • show cifs smb1_stat
  • show cifs smb2_stat
  • show cifs smb3_switch
  • show controller dma_type
  • show dedup_lun scrub
  • show dedup_lun scrub_error_info
  • show disk slowthreshold
  • show disk_reliability_policy slow_disk_detect
  • show file_system check
  • show file_system dirtydata
  • show file_system isolate_object
  • show file_system min_fs
  • show file_system optimization
  • show file_system repair
  • show file_system rescue
  • show file_system scrub
  • show file_system scrub_error_info
  • show fs_snap_control status
  • show fsa open_lock
  • show fsa operation_timeout
  • show fsa request_stat
  • show fsa stat_switch
  • show hyper_metro_consistency_group config
  • show hypervault_backup general
  • show hypervault_event general
  • show hypervault_restore general
  • show nas_log debug_switch
  • show nas_mem health_limit
  • show nfs connection
  • show nfs nfsv3_err_stat
  • show nfs nfsv3_lock_db
  • show nfs nfsv3_nlm_stats
  • show nfs nfsv3_nlm_svc_info
  • show nfs nfsv3_readdirplus_support
  • show nfs nfsv3_stat
  • show nfs nfsv4_dbuffer
  • show nfs nfsv4_err_stat
  • show nfs nfsv4_idmap_support
  • show nfs nfsv4_stat
  • show nfs readdir_buf
  • show nfs rtt_switch
  • show nfs server_info
  • show nfs server_stat
  • show nfs stat_switch
  • show nfs work_queue_info
  • show omnilock brl
  • show omnilock brl_lock_info
  • show omnilock file
  • show omnilock lock_client_info
  • show omnilock lock_client_stat
  • show omnilock lock_server_info
  • show omnilock lock_server_stat
  • show omnilock open
  • show omnilock open_lock_wait_info
  • show omnilock rtt_switch
  • show pal async_delete
  • show pal async_delete_apo
  • show pal async_delete_info
  • show pal attribute
  • show pal clear_trunc_xattr
  • show pal control_flow
  • show pal control_info
  • show pal control_trace
  • show pal counter
  • show pal dentry
  • show pal dentry_info
  • show pal directory
  • show pal event_record
  • show pal extra_attribute
  • show pal extra_attribute_list
  • show pal fai
  • show pal file_handle
  • show pal file_system_event
  • show pal file_system_perfomance
  • show pal file_system_service_stat
  • show pal forward_info
  • show pal link_table
  • show pal master_node
  • show pal memory
  • show pal notify_entry
  • show pal notify_memory
  • show pal path
  • show pal rtt
  • show pal snap_fai
  • show pal truncate_info
  • show pal vaai_io_counter
  • show pal vaai_list
  • show pal vaai_property
  • show pal vaai_task
  • show pal vaai_task_info
  • show pal vnode_attribute
  • show pal worm_file_attribute
  • show performance ndmp
  • show pim stat
  • show protocol debug
  • show ral counter
  • show rdcl dataset
  • show rel counter
  • show rel memory
  • show rel status
  • show rel task
  • show remote_replication_vstore cfg_switch
  • show remote_replication_vstore configuration
  • show space abnormal_file_system_info
  • show space apo_entry_info
  • show space apo_info
  • show space check_space_consistency
  • show space dmn_info
  • show space flow_control
  • show space flow_io
  • show space grain
  • show space grain_alloc
  • show space grain_defree
  • show space grain_dynamic
  • show space grain_extent_count
  • show space grain_extent_queue
  • show space grain_extent_tree
  • show space grain_extent_tree_status
  • show space grain_io
  • show space object_bonus
  • show space object_config
  • show space object_mem
  • show space object_set_info
  • show space sio
  • show space stage_info
  • show space statistic_info
  • show space task_flow_info
  • show space transaction
  • show space uberblock
  • show statistic nfs_connection
  • show statistics ftp_connection
  • show statistics ftp_connection_count
  • show statistics_switch ftp
  • sio show slowthresh
  • spa showqueueinfo
  • space.sh
  • ss showtask
  • ssdc show obj
  • sys showdblock
  • sys showlockhandle
  • sys showmem
  • sys showzoneinfo
  • tx mgr
  • vols showcmdcnt
  • os initibcpassword
  • show logical_port failover_switch
  • change remote_replication_vstore cfg_switch
  • show nfs nfsv3_forward_stat
  • clear nfs nfsv3_forward_stat
  • eam addmgrethip
  • change disk slowthreshold
  • change dha singlemodelconfig
  • change nfs age_time
  • show nfs age_time
  • change file_system switch
  • show file_system switch
  • change port enabled
  • show ad_process status
  • sys.sh
  • show service ndmp_connection
  • show statistic ndmp_connection
  • change file_system scrub
  • change file_system optimization
  • change file_system rescue
  • change hyper_metro most_domain_enabled
  • show hyper_metro most_domain_enabled
  • change space global_config
  • show space global_config
  • change cifs share_cache
  • clear cifs share_cache
  • ccdb.sh
  • devlun showctrl
  • show space_task general
  • show ftp stat
  • show ndmp stat
  • sshtoremoteExt
  • poweroff enclosure
  • change logical_port failover_switch
  • rst_svc_ctl.sh
  • change hyper_metro_pair general*
  • change hyper_metro_consistency_group general*
  • change lun_takeover enhance_switch

Issue 05 (2018-01-30)

This is the fifth official release. The updates are as follows:

Added commands:
  • restore_sysenclosure_info.sh
  • show failover_path general
  • cache show iomode
  • dmi.sh
  • show lun cache_sequence_flow
  • change port enabled
  • os resumebootmode
  • show global_task_restrict switch
  • change global_task_restrict switch
  • change remote_device degrade_param
  • help*
  • change disk_domain lid_switch
  • show disk_domain lid_switch
  • upgrade_atom
  • os_upgrade_coldpatch.sh
  • clear cifs share_cache
  • change cifs share_cache
  • change ddp limit_time
  • eam setoeminfo
  • eam framecode
  • eam getenclosureinfo
  • eam setframecascademode
  • eam setdefaultframecascademode
  • change tgt_switch caw_feature
  • change tgt_switch loss_inq
  • show tgt_switch loss_inq
  • show tgt_switch caw_feature
  • alarm sendalarm
  • clear_user.sh
  • showbayconfig
  • os resetdswconfig
  • change hyper_metro most_domain_enabled
  • show hyper_metro most_domain_enabled
  • change vlan_offload state
  • scsi showaluainfo
  • tgt gethostidlist
  • tgt showses
  • show driver queuedepth
  • change driver queuedepth
  • lm showluntopair
  • pair showHoldReqlist
  • pair showpairio
  • pair showlogmgr
  • pair showloglist
  • lm showlunservice
  • lmr showluntopair
  • bgr showoverload
  • ioctrl showhang
  • lmr show lunservice
Modified commands:
  • os_backup_info.sh
  • modifydbtableinfo.sh
  • show system configuration_log
  • xrb iom
  • xnet showctrlmsgnum
  • xnet showrpageinfo
  • logzonefreelogbylogid.sh
  • mp show path2lun
  • os showstatus
  • change disk_domain repair_pool_meta
  • cleardb
  • show kms statistics
  • show kms key
  • import kms key
  • show space global_config
  • change remote_device transport_optimize
  • change system force_write_back
  • cache show obj
  • change disk factory_reset
  • change file_system optimization
  • change file_system rescue
  • change file_system scrub
  • change nfs age_time
  • delete root_cause_alarm rule
  • os_change_bayconfig.sh
  • show nfs age_time
  • show service ndmp_connection
  • show statistic ndmp_connection
  • show disk_bom blacklist
  • show disk_bom list_config
  • show disk_bom whitelist
  • change cache seqflow
  • sys.sh
  • omm show_status
  • show failover_path general
  • change file_system switch
  • clear configuration_data
  • show file_system switch
  • change space global_config
  • ccdb.sh
  • show global_task_restrict switch
  • change global_task_restrict switch
  • change remote_device degrade_param
  • clear cifs share_cache
  • change cifs share_cache

Issue 04 (2017-11-30)

This is the fourth official release. The updates are as follows:

Added commands:
  • cache show dirty cachebase
  • cache show limitio
  • cache show saslimitinfo
  • cache show conflict
  • cache show destage
  • cache show writehole
  • cache show poolConcur
  • cache show concur
  • cache show seqflow
  • cache show deamon
  • cache show cachetask
  • cache show fschunk
  • cache show fsdnode
  • cache show timeout
  • cache showlogstatus
  • change iod schedule_information
  • show iod schedule_information
  • show nfs nfsv4_opened_files
  • bdm_diskbomlist.sh
  • change remote_device transport_optimize
  • sys showpoollock
  • sys showgpoollock
  • change disk ak_auth_recover
  • upgrade.sh
  • appfs_cp
  • appfs_up
  • bdinfo
  • boot
  • bootd
  • cfgfs_cp
  • base
  • bootm
  • bootp
  • cfgfs_up
  • coninfo
  • datafs_cp
  • datafs_reset
  • datafs_up
  • cp
  • crc32
  • ddr_test
  • cmp
  • dt
  • echo
  • false
  • flashdata_burning
  • fsinfo
  • dts
  • editenv
  • erase
  • flinfo
  • fsload
  • hiddr_test
  • iminfo
  • go
  • itest
  • loadb
  • loads
  • loop
  • loady
  • mtdparts
  • nfs
  • nm
  • passwd
  • lswwrite
  • md
  • mm
  • mtest
  • mw
  • lswread
  • protect
  • rootfs_cp
  • rootfs_up
  • phyread
  • phywrite
  • rarpboot
  • saveenv
  • setenv
  • spi_test
  • true
  • uboot0_up
  • uboot1_up
  • run
  • sleep
  • tftpboot
  • uboot_cp0
  • uboot_cp1
  • version
  • printenv
  • fssnap show snapchangelist recordInfo
  • fssnap show snapchangelist kvInfo
  • fssnap show snapchangelist logIndexObjInfo
  • fssnap show snapchangelist logObjInfo
  • fssnap show snapchangelist logObjData
  • fssnap show snapchangelist logMgt
  • fssnap show snapchangelist allSession
  • fssnap show sessionInfo
  • fssnap show tsmConcurrency
  • fssnap show allTsmSession
  • delete fs_private_snapshot force
  • show nfs nfsv3_forward_stat
  • clear nfs nfsv3_forward_stat
  • bdm_efuseswitch.sh
  • iod waittrace show
  • change iod waittrace
  • show iod stat_switch
  • change iod switch
  • iod show timer
  • context showcnt
  • iod tp show
  • context show all
  • os_clean_ipconfig.sh
  • eam addmgrethip
  • Overload_ctrl show cur_cpu_load
  • bgr showevent
  • pair showevent
  • bgr showjobinfo
  • rim showio
  • ioctrl showio
  • spc showbonuscacheinfo
  • change disk dif_error_stat
  • os rebootdsw
Modified commands:
  • show context general
  • show space grain_extent_tree_status
  • show file_system check
  • show ddp accelerate_card
  • show rel counter
  • show rel task
  • show rel memory
  • show pal replication_info
  • show pal forward_info
  • show pal vaai_task
  • show pal vaai_list
  • show pal file_system_perfomance
  • show pal event_record
  • show pal control_flow
  • show pal directory
  • change pal rtt
  • change pal async_delete
  • show space sio
  • show space grain_io
  • change space grain_extent_tree
  • show space grain_extent_queue
  • show space grain_alloc
  • show space grain_dynamic
  • show space task_flow_info
  • show space grain_defree
  • show space quota
  • show space object_bonus
  • show space object_mem
  • show space object_config
  • show space stage_info
  • show space flow_control
  • show space grain
  • change fs_snapshot check_strategy
  • change spacetx timer
  • show rel status
  • show space apo_info
  • show space apo_entry_info
  • show antivirus mempool
  • show scsi_upgrade_config upgrade
  • cache show chunktrace
  • cache show iotrace
  • cache show timepoint
  • change cache clear_obj
  • change file_system isolate_object
  • change identity_mapping cache_config
  • change nfs send_buf
  • arp
  • btree showcounter
  • cache show chunk
  • cache show dirty bitmap
  • cache show forcemirror
  • cache show label
  • cat
  • change cifs reserve_bit
  • change file_system_possessed general
  • change nfs age_time
  • cache show partition
  • change cache file_system_hitcount
  • change cache fs_dsgbase_concur
  • change nas_mem health_limit
  • clear performance ndmp
  • cpy listprocess
  • change spaceflow general
  • change spc rtt_switch
  • change system cache_write_quota
  • cln getglobalvar
  • cmm show modmem
  • cpy showextluninfo
  • devlun showbadio
  • devlun showusedlun
  • devlun showwritealloclist
  • change ssd diagswitch
  • cpy pair
  • date
  • delete root_cause_alarm rule
  • devlun showcbcnt
  • devlun showtimeoutio
  • du
  • epl showintf
  • epl showtask
  • epl versionservice
  • extent showdrarb
  • extent showdstlist
  • extent showdstobjrbnodenum
  • extent showinitprintswitch
  • lm showldb
  • lm showsysevent
  • lmr showlock
  • lmr showtaskctrlinfo
  • odx showdstlist
  • odx showsessionlist
  • pal ctrl showtask
  • pal quota show scanstat
  • pal retry show
  • extent showdstpoolinfo
  • extent showfastmigrationmode
  • lmr showgdb
  • logzone show retrymgr
  • mm showcopy
  • odx showrec
  • pal adel show all
  • pal ctrl showplugin
  • pal dentry showinfo
  • pal quota show fsscaninfo
  • pal quota show scaninfo
  • rephc querydomainarbLink
  • rephc showlicense
  • bgr showalljobnumber
  • bgr showbgrinfo
  • cache show ckg
  • cache show cmd
  • cache show retrylist
  • change cache clear_evict
  • change controller dma_type
  • change fsa open_lock
  • change nfs recv_buf
  • devlun showcmdcbcount
  • devlun showtimerinfo
  • drvfcoe showall
  • epl linkq
  • epl showspec
  • exit*
  • export file_system dirtydata
  • extent showdrasort
  • extent showfastinitswitch
  • grain showFillPolicy
  • lmr showspec
  • logzone bdm read
  • logzone show disk
  • logzone show logid
  • logzone show workctrl
  • odx showsrclist
  • pal ctrl minloadinfo
  • pal ctrl show fsstat
  • pal rel showfaultheal
  • pal showfsspec
  • rep showlastfailtrace
  • show controller dma_type
  • show cpu
  • show fsa open_lock
  • show nfs work_queue_info
  • show pal counter
  • change system external_tlv_channel
  • change system force_write_back
  • cln getfreelistinfo
  • cmm show rsvdmemory
  • delete dedup_lun scrub_error_info
  • drvfcoe showbusyexch
  • drvfcoe showversion
  • epl showreport
  • exportmemdb
  • extent showdrainfo
  • extent showiomdstobjinfo
  • grain showMergeTreeItemNum
  • lm showhealstate
  • lm showtaskctrlinfo
  • lmr showhealstate
  • lmr showldb
  • lmr showpairctrlinfo
  • lmr showsysevent
  • mm showcallcount
  • odx showbgrwaitinglist
  • odx showspec
  • os_change_bayconfig.sh
  • rephc showstartinfo
  • rephc showWaitSelfHealevent
  • setsysdirtydataflag.sh
  • show cifs reserve_bit
  • show dedup_lun scrub
  • show dlm ccdb_receive_event
  • show file_system mounts
  • show nfs rtt_switch
  • show pal control_trace
  • show pal memory
  • show sdd array_conf
  • show sdd io_stat
  • show space uberblock
  • show ssd diagswitch
  • show system trace
  • showdiskinfo
  • showsysstatus
  • ssdc show pt
  • ssdc show st basic
  • sys showfsminiloadtime
  • volume showcowentry
  • volume showmetacmdstepcnt
  • rep showcall
  • rephc showalltask
  • show file_system isolate_object
  • show lun_possessed general
  • show nas_mem health_limit
  • show ral counter
  • show system trace_with_type
  • ssdc show objDelBlkDetail
  • sys showcfgcmdhistory
  • sys showcfglog
  • sys showcmdhistory
  • umount
  • volume showbadio
  • volume showbgswitch
  • volume showresformatinfo
  • show dedup_lun scrub_error_info
  • show file_system min_fs
  • show file_system_possessed general
  • show identity_mapping cache_config
  • show loopback test
  • show root_cause_alarm rule
  • show statistics ftp_connection_count
  • show system external_tlv_channel
  • snap showcapacity
  • snap showgdbinfo
  • snap showldbinfo
  • ssdc show copyspeed
  • ssdc show mem
  • sshtoremote
  • tx mgr
  • vols showtaskcnt
  • volume showrealpart
  • show performance ndmp
  • show service ndmp_connection
  • show space grain_extent_count
  • ssdc show bg
  • ssdc show copystate
  • ssdc show obj
  • ssdc show ssd
  • volume show verifystripeconfig
  • volume showbgnum
  • volume showmetacmdcnt
  • change ddp metadata_rebuild
  • os changebootfromtftp
  • os setforbidlogintime
  • os generatesshkey
  • os initibcpassword
  • os setmaxfailcnt
  • show system inter_ip
  • show ddp metadata_rebuild
  • space.sh
  • scsi show iocount
  • rephc showcgruncnt
  • show meta_data
  • show pal path
  • show nfs stat_switch
  • change file_system force_expand
  • show fs_snap_control action
  • show fs_snap_control all_task_info
  • show fs_snap_control code
  • show fs_snap_control last_task_id
  • show fs_snap_control status
  • show fs_snap_control task
  • logzone.sh
  • delete hyper_metro_pair dcl
  • delete hyper_metro_pair rsstype
  • delete hyper_metro_domain db
  • clear hyper_metro_consistency_group db
  • show hyper_metro_consistency_group config
  • remove hyper_metro_consistency_group member
  • change hyper_metro_consistency_group link_status
  • drvsascbb readreg
  • drvsascbb showdevinfo
  • drvsascbb getroutelist
  • drvsascbb showrsc
  • drvsascbb getfwinfo
  • delete file_system scrub_error_info
  • show file_system dirtydata
  • show pal fai
  • show pal replication_task_info
  • show pal vaai_task_info
  • show pal vnode_attribute
  • show file_system repair
  • show file_system scrub_error_info
  • change scsi_upgrade_config upgrade
  • delete private_device db
  • show fs_security descriptor
  • change slow_system_disk monitor_parameter
  • delete hypervault dcl
  • delete hypervault rss_type
  • delete hypervault service_db
  • delete hypervault_db general
  • drvist showconfid
  • drvist showconfig
  • drvist showmgmt
  • drvist showtracecmd
  • drvist showstatus
  • drvisi showremottgtinfo
  • sys showlicswitch
  • cache show iocounter
  • cache show prefetch
  • cache show concurrent
  • cache show mirror
  • cache show waitalloc
  • rephc showCgInt
  • rephc showAllCgLockInfo
  • rephc showCgLockInfo
  • rephc querydomainarb
  • rephc querydomain
  • rephc querydbpair
  • rephc queryldbpair
  • rep showtrace
  • rephc showluntopair
  • rephc showAllPairLockInfo
  • rephc showPairLockInfo
  • rephc showspec
  • rephc querypair
  • xnet showxcmthread
  • pair showobjs
  • bgr showalljobinfo
  • show fs_snapshot resource
  • show pal async_delete_info
  • show space abnormal_file_system_info
  • show space check_space_consistency
  • show space dmn_info
  • show space grain_extent_tree
  • show space object_set_info
  • show space transaction
  • show statistics ftp_connection
  • sys.sh
  • show nfs readdir_buf
  • show system work_mode
  • change file_system rescue
  • show file_system rescue
  • change space rescue_config
  • show file_system optimization
  • change file_system scrub
  • show file_system scrub
  • change system support_enclosure
  • show statistic nfs_connection
  • delete hyper_metro_vstore_pair rss
  • change controller offline
  • change disk slowthreshold
  • add shake_alarm general
  • scsi show tpgstatus -l lunID
  • tgt show portlist
  • tgt show lunmap
  • tgt show command
  • tgt show mapview
  • tgt show rtt
  • tgt show state
  • tgt show host
  • tgt show io
  • scsi show reservation all
  • showioinfo.sh
  • cmm show memrecoverflag
  • sys showdiflevel
  • change extent fast_migration_mode
  • change extent init_print_switch
  • change extent relocation_period
  • change extent fast_init_switch
  • change extent large_io_threshold
  • show extent large_io_threshold
  • clear nfs nfsv3_lock
  • change mp_mode
  • clear nfs nfsv4_idmap_cache
  • show disk_bom list_config
  • show disk_bom blacklist
  • show disk_bom whitelist
  • change dha switch
  • sshtoremoteExt
  • change disk clearerrordlt
  • change disk fault
  • change disk sn
  • restore disk general
  • change disk iolimit
  • sys showdblock
  • change cache dsgbase_concur
  • cache show global
  • change dha judgeboundary
  • change dha judgeproportion
  • change dha modelswitch
  • change dha scorestrategy
  • change dha singlemodelconfig
  • show dha judgeboundary
  • show dha judgeproportion
  • show dha modelswitch
  • show dha scorestrategy
  • show dha singlemodelconfig
  • change dha servicestatus
  • change dha policy
  • change disk unplug
  • show dha policy
  • show dha score
  • show sched
  • change sched
  • show dha servicestatus
  • show disk unplug
  • change disk factory_reset
  • change disk prefail
  • ld show beingsynclds
  • ld show disk
  • ld show var
  • sddebug show disk
  • ld show dp
  • ld show slaveevent
  • ld show tmpdisks
  • sddebug show device
  • sio show slowthresh
  • sio show statall
  • sio show bdmiostat
  • hdm show diskfwconf
  • hdm show logpage
  • hdm show diagrecord
  • sio show deviostat
  • show fs_clone split
  • mr showbgtask
  • mr showblkalloclist
  • mr showfilestatus
  • mr showlogcmdcnt
  • mr showlogcmdmgr
  • mr showlogtriginfo
  • mrm showreclaimtask
  • mrr rluncounter
  • mrr showenvaction
  • mrr showrpinfo
  • mr checkblkmgr
  • mr showfilemgr
  • mr shownoservicelun
  • mr showobjset
  • mr showswitchsetting
  • mr showsysnobaklun
  • mr showtreehandle
  • mr showtreeswitchstate
  • mrr rlunshowlogzone
  • mrr showcheckinfo
  • mr actioncounter
  • mr bgrcounter
  • mr checkcrc
  • mr resource
  • mr showflowcnt
  • mr showloginfo
  • mr showstatus
  • mrm list
  • mrm showcounter
  • mrm showmem
  • mrr backupbuildcounter
  • mrr list
  • mrr rebuildbtreeactioncount
  • mrr repairextentcountshow
  • mrr rlunshowclsstatus
  • mrr showcfsaction
  • mrr showflow
  • mrr showvfsaction
  • mr showbackupapplywaitlist
  • mr showblkarr
  • mr showblkmgr
  • mr showckgmgr
  • mr showreserve
  • mrr rlunshowflow
  • mrr rlunshowlogzonecnt
  • mrr showfsraction
  • mrr showfsrepairstatus
  • mrr showrowlunrepairaction
  • mrr showrpoolaction
  • change sas_card disk_path_selector
  • show sas_card disk_path_selector
  • disklog show
  • bst restoreio
  • ckgiof showtmoutreq
  • ckgiof showwriteerr
  • ckglock showmasterplock
  • ckgiof ehstate
  • ckgiof luntrans
  • disklog repairio
  • fmt io
  • fmt showflowinfo
  • fmt showtask
  • leveling querydisk
  • ms showio
  • pmgr showpool
  • disklog showrepair
  • fmt showbgr
  • fmt showdisk
  • fmt showparallel
  • leveling io
  • ms showtask
  • pmgr showalltask
  • pmgr showvideocfg
  • recon debugshowstart
  • disklog showobj
  • disklog showstate
  • disklog showtreeobj
  • fmt showdomain
  • leveling progress
  • ms showscan
  • pmgr showdisk
  • disklog showlogzone
  • disklog showpoolnowrite
  • fmt showglobal
  • ms showtime
  • pmgr showPoolInfo
  • pmgr showsysbitmap
  • recon showio
  • ss showdisk
  • ss showtask
  • writehole showlist
  • ss showio
  • writehole showwh
  • ss showperiod
  • ss showpool
  • ss showscan
  • writehole io
  • ckgiof io
  • kvdb alltable
  • kvdb itemcache
  • kvdb nodecache
  • kvdb baseinfo
  • nmgr searchnode
  • mcachelayer queryckg
  • mcachelayer queryext
  • nmgr showallinst
  • spa exportimportnode
  • spa querypoolcap
  • spa queryvolcap
  • spa queryvolquota
  • spa showbgrcount
  • spa showrootckg
  • spa exportimportextent
  • spa querydpsyncinfo
  • spa showqueuemgrstat
  • spa showsmolog
  • spa showxnetstat
  • spa zoneckgextnum
  • spa exportimportckg
  • spa exportimportnode_ext
  • spa showmrckg
  • spa showqueueinfo
  • spa showqueueobj
  • spa showsmgrerrcn
  • spa showvolaction
  • nmgr showfunc
  • mcachelayer counter
  • spa bgrcnt
  • spa showckgreq
  • kvdb memory
  • kvdb tableid
  • change hyper_metro_vstore_pair link_status
  • delete hyper_metro_pair log
  • show mp_mode
  • show array_support_lib general
  • change hyper_metro_pair link_status
  • delete hyper_metro_vstore_pair db
  • show statistic ndmp_connection
  • clear nfs nfsv4_dbuffer
  • change shake_alarm general
  • show shake_alarm general
  • initlocalpasswd
  • show nfs nfsv4_dbuffer
  • show noma rtt_jitter
  • change root_cause_alarm rule
  • tgt show timeoutio
  • show pal snap_fai
  • change file_system check
  • show pal async_delete_apo
  • omm show_status
  • change space grain
  • delete space grain_extent_tree
  • show disk slowthreshold
  • change disk_domain meta_space_utilization
  • sys showlockhandle
  • show antivirus scan
  • show hypervault_restore general
  • show hypervault_backup general
  • arb showall
  • arb showtrace
  • pair showcounter
  • ccdb.sh
  • upgrade disk_convertor
  • show disk_convertor upgrade_status
  • show nfs server_info
  • clear nfs nfsv3_nlm_stats
  • clear nfs server_stat
  • clear nfs nfsv4_stat
  • clear nfs nfsv3_stat
  • change nfs nfsv3_readdirplus_support
  • change nfs stat_switch
  • change nfs rtt_switch
  • show nfs nfsv3_nlm_stats
  • show nfs nfsv4_err_stat
  • show nfs nfsv3_nlm_svc_info
  • rephv mutex show
  • rephv logzone show
  • rephv policy show
  • rephv lock show
  • rephv vault show
  • rephv nego show
  • change nfs nfsv4_idmap_support
  • clear nfs nfsv3_lock_db
  • clear nfs share_cache
  • show nfs nfsv4_idmap_support
  • show nfs nfsv4_stat
  • show nfs connection
  • show nfs nfsv3_stat
  • show nfs nfsv3_err_stat
  • show nfs nfsv3_lock_db
  • show nfs nfsv3_readdirplus_support
  • show nfs age_time
  • show nfs server_stat
  • change fsa stat_switch
  • clear fsa operation_timeout
  • clear fsa request_stat
  • show fsa stat_switch
  • ssdc show volCachedDataInfo
  • show fsa request_stat
  • show fsa operation_timeout
  • delete file_system force
  • change cache_partition ratio
  • change statistics_switch ftp
  • show statistics_switch ftp
  • show cifs connection
  • show cifs server_info
  • show cifs server_stat
  • show cifs smb1_stat
  • change cifs keep_idle
  • clear cifs fp_record
  • clear cifs server_stat
  • clear cifs smb1_stat
  • clear cifs smb2_stat
  • show cifs fp_record
  • show cifs smb2_stat
  • show cifs smb3_switch
  • show omnilock brl_lock_info
  • show omnilock lock_client_stat
  • show omnilock lock_server_info
  • show omnilock lock_server_stat
  • show omnilock open_lock_wait_info
  • show omnilock open
  • show omnilock brl
  • show nas_log debug_switch
  • change cifs rtt_switch
  • change omnilock rtt_switch
  • show cifs rtt_switch
  • show omnilock rtt_switch
  • change omnilock open
  • show dedup_lun repair_info
  • show lun repair_info
  • clear pim stat
  • show pim stat
  • show protocol debug
  • clear fs_snapshot residual_clone_ref
  • change fs_clone split_force
  • change space config
  • show hypervault_event general
  • change noma rtt_jitter
  • change file_system optimization
  • change space grain_merge_tree
  • show fs_snapshot clone_ref
  • change disk_domain leveling
  • change disk_domain stripe_restore_repair
  • change disk_domain clear_disk
  • change disk_domain stripe_restore_data
  • delete disklog
  • show disk_domain stripe_verify_restore
  • change storage_pool lun_online
  • change pal clear_trunc_xattr
  • show pal clear_trunc_xattr
  • add root_cause_alarm rule
  • change file_system vstore
  • cache show evict
  • show omnilock lock_client_info
  • clear cifs connection
  • change cifs log_level
  • change file_system min_fs
  • rephc showcgcfg
  • change space check_space_consistency
  • lm showpairctrlinfo
  • lm showgdb
  • delete hyper_metro_pair db
  • show omnilock file
  • change system work_mode
  • show fs_clone split_concurrent_num
  • change fs_clone split_concurrent_num
  • clear configuration_data
  • pair showSyncStatics
  • show rdcl dataset
  • show rdcl data_change_log
  • rdcl showtxcheck
  • show rdcl io
  • change odx job_information
  • change fs_clone split_concurrent_size
  • show fs_clone split_concurrent_size
  • change hyper_metro_vstore_pair full_sync_cfg
  • change hyper_metro_pair full_sync_cfg
  • change file_system amend
  • change dedup_lun scrub
  • change cache seqflow
  • delete hyper_metro_pair dump
  • change storage_pool repair_dedup_lun
  • change file_system repair
  • snap showaction
  • snap showlogzone
  • snap showflag
  • vols showcmdcnt
  • os showipconfig
  • show logical_port failover_switch
  • change protocol debug
  • change service ndmp_delete_snapshot
  • show disk_reliability_policy slow_disk_detect
  • delete remote_replication_vstore rss
  • delete remote_replication_vstore db
  • eam showevent
  • eam showglobaldbtable
  • delete firewall configuration
  • upgrade system_disk
  • showsystrace
  • sys showfrustatus
  • os_write_bay_cfg.sh
  • devlun showstepcount
  • sys showclm
  • sys showcmdlist
  • sys showzoneinfo
  • change cache dsg_poolconcur_watermark
  • change remote_replication_vstore link_status
  • show remote_replication_vstore configuration
  • sys showcls
  • sys showflowstatus
  • sys showobjstatus
  • sys showflowtrace
  • sys showtrace
  • sys showmem
  • sys showsyslock
  • sys showfailedtrace
  • sys showfailedflowtrace
  • sys showglunlock
  • sys showlunlock
  • allalarm
  • qerr
  • overtime
  • rfru
  • getkerlog
  • is
  • showphy
  • showversion
  • rsensor
  • showdisk
  • showcpld
  • showfan
  • showpower
  • ai
  • fssnap show ro recy
  • fssnap show ro capacity
  • fssnap show ro src_fs_os
  • fssnap show ro base
  • fssnap show deadlist
  • fssnap show snap_dmn
  • fssnap show ro dataset
  • fssnap show bpo_in_subbpo
  • fssnap show bp_in_bpo
  • fssnap show deadlist_obj
  • fssnap show bpo
  • spc showstage
  • spc showrtt
  • spc showapohashtable
  • change disk_reliability_policy slow_disk_detect
  • cache show obj
  • change nas_log debug_switch
  • clear omnilock open
  • clear omnilock brl
  • change cifs keep_alive_switch
  • delete omnilock open
  • change cifs smb3_switch
  • clear nfs connection
  • show logical_port failover_switch
  • show space statistic_info
  • change space global_config
  • show space global_config
  • change remote_replication_vstore full_sync_cfg
  • change remote_replication_vstore cfg_switch
  • change remote_replication cfg_switch
  • show remote_replication cfg_switch
  • show remote_replication_vstore cfg_switch
  • change remote_replication full_sync_cfg
  • clear omnilock lock_client_stat
  • change cluster master
  • drvist showperf
  • drvist showsess
  • drvist showallinfo
  • drvist showport
  • drvist showlink
  • drvist showsessonport
  • show space statistic_info
  • show space flow_io
  • minisystem
  • change rdcl io_clear
  • show file_system switch
  • change file_system switch
  • cache show dirty cachebase
  • cache show limitio
  • cache show saslimitinfo
  • cache show conflict
  • cache show destage
  • cache show writehole
  • cache show poolConcur
  • cache show concur
  • cache show seqflow
  • cache show deamon
  • cache show cachetask
  • cache show fschunk
  • cache show fsdnode
  • cache show timeout
  • cache showlogstatus
  • change space global_config
  • change space global_config
  • change cache file_system_hitcount
  • cache show obj
  • sys showcfglog
  • sys showfsminiloadtime
  • change cache dsgbase_concur
  • change cache file_system_hitcount
  • change system force_write_back
  • show noma rtt_jitter
  • change noma rtt_jitter
  • change disk ak_auth_recover
  • cache show seqflow
  • change dha judgeboundary
  • change dha judgeproportion
  • change dha modelswitch
  • change dha policy
  • change dha scorestrategy
  • change dha servicestatus
  • change dha singlemodelconfig
  • change dha switch
  • change disk slowthreshold
  • change remote_replication_vstore cfg_switch
  • restore disk general
  • show dha policy
  • show dha score
  • show dha scorestrategy
  • show dha servicestatus
  • show dha singlemodelconfig
  • show noma rtt_jitter
  • clear configuration_data
  • show nfs nfsv3_forward_stat
  • clear nfs nfsv3_forward_stat
  • change disk slowthreshold
  • change mp_mode
  • change file_system switch
  • show file_system switch
  • show file_system switch
  • change file_system switch
  • ccdb.sh
  • change space global_config
Deleted commands:
  • show space statistic_info

Issue 03 (2017-08-30)

This is the third official release. The updates are as follows:

Deleted download links of third-party tools.

Issue 02 (2017-06-01)

This is the second official release. The updates are as follows:

Added, modified, and deleted some commands.

Issue 01 (2017-02-28)

This is the first official release.

Translation
Download
Updated: 2018-10-15

Document ID: EDOC1000138389

Views: 65630

Downloads: 67

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next