No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 18000 V3 Series V300R006 Installation Guide

This document is applicable to OceanStor 18500 V3 and 18800 V3. This document describes the installation procedures of the storage system, covering the following parts: precautions and preparations, installing bays, cabling, installation check, poweron,status indicator check, and initializing the storage system.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes hardware installation of storage systems, covering the following parts: precautions and preparations, installation flow, cabling, installation check, power-on,and status indicator check.

The following table lists the product models applicable to this document.

Product Series

Product Model

OceanStor 18000 V3 series

OceanStor 18500 V3 and 18800 V3

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Updates between document issues are cumulative. Therefore, the latest document issue contains all updates made in previous issues.

Issue 08 (2018-07-30)

This is the eighth release.

Optimized some description.

Issue 07 (2018-06-30)

This is the seventh release.

Optimized some description.

Issue 06 (2018-05-09)

This is the sixth release.

Optimized some description.

Issue 05 (2018-01-30)

This is the fifth release.

Added port failover network principles.

Issue 04 (2017-11-30)

This is the fourth release.

Optimized some description.

Issue 03 (2017-08-30)

This is the third release.

Updated the recommended number of disk enclosures that connect to a pair of SAS ports.

Issue 02 (2017-06-01)

This is the second release.

In Enabling the Syslog Notification Function, added descriptions about parameters of the

Syslog notification.

Issue 01 (2017-02-28)

Initial commercial release.

Translation
Download
Updated: 2018-10-15

Document ID: EDOC1000138684

Views: 15575

Downloads: 86

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next