No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SCOM Plugin V100R002C20 User Guide 04

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This guide describes how to install and uninstall the SCOM plugin and monitor Huawei devices.

Intended Audience

This document is intended for:

  • Installation and commissioning engineers
  • Technical support engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 04 (2018-06-29)

Modified Configuring a Rack Server.

Issue 03 (2017-07-10)

Modified Configuring a Rack Server.

Issue 02 (2017-06-30)

Information about the support for E9000 server monitoring is added.

Issue 01 (2017-06-02)

This issue is the first official release.

Translation
Download
Updated: 2018-07-05

Document ID: EDOC1000150016

Views: 3233

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next