No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server Compute Node and Switch Module iBMC (V250 or Later) Alarm Handling 12

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Overview

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.

This document applies to the following servers and nodes:
  • V3 compute nodes: CH121 V3, CH121L V3, CH121H V3, CH140 V3, CH140L V3, CH220 V3, CH222 V3, CH225 V3, CH226 V3 and CH242 V3 DDR4
  • V5 compute nodes: CH121 V5, CH121L V5, CH221 V5, CH225 V5 and CH242 V5
  • Switch modules: CX220, CX320, CX318, CX620, CX621, CX710, CX820, CX920, CX916 and CX916L

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The following table lists the symbols that may be found in this document.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all changes made in previous issues.

Issue

Date

Description

12 2018-11-05

From iBMC V316, the CPU and disk alarms will also include the SN and part umber and the mainboard and memory alarms will also include the part number.

11 2018-08-08

Updated ALM-0x08000005 Failed to Read PCIe Card Temperature (PCIe Card, Minor Alarm).

10 2018-07-05

Updated ALM-0x08000003 PCIe Card Overtemperature (PCIe Card, Minor Alarm), and ALM-0x08000005 Failed to Read PCIe Card Temperature (PCIe Card, Minor Alarm).

09 2018-05-30
08 2018-05-14

Added ALM-0x06000017 RAID Card Overtemperature (RAID Card, Major Alarm).

07 2018-03-29

Added ALM-0x49000001 BMA Failed to Create the Transfer Mapping Table (BMA, Minor Alarm), ALM-0x1A00002F NAND Flash Service Life Lower Than Threshold (BMC, Major Alarm), and ALM-0x1A000031 Insufficient NAND Flash Reserved Blocks (BMC, Major Alarm).

06 2018-02-11

Added new alarms.

05 2017-12-28

Added new alarms.

04 2017-10-27

Added a parameter for alarm 0x06000007.

03 2017-10-12

Added new alarms.

02 2017-08-14

Added new alarms.

01 2017-06-30

The issue is the first official release.

Translation
Download
Updated: 2018-11-21

Document ID: EDOC1000157051

Views: 27331

Downloads: 121

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next