No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei High-Density Server iBMC (V250 or Later) Alarm Handling 13

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Overview

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.

This document applies to the following servers and nodes:
  • XH620 V3, XH622 V3, XH628 V3, XH628 V5
  • XH310 V3, XH321 V3, XH321 V5, XH321L V5

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The following table lists the symbols that may be found in this document.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all changes made in previous issues.

Issue

Date

Description

13 2018-11-21

Updated ALM-0x00000063 Failed to Read CPU Voltage (CPU, Minor Alarm).

12 2018-11-05

From iBMC V316, the CPU and disk alarms will also include the SN and part umber and the mainboard and memory alarms will also include the part number.

11 2018-08-08

Updated ALM-0x08000005 Failed to Read PCIe Card Temperature (PCIe Card, Minor Alarm).

10 2018-07-05

Updated ALM-0x08000003 PCIe Card Overtemperature (PCIe Card, Minor Alarm), and ALM-0x08000005 Failed to Read PCIe Card Temperature (PCIe Card, Minor Alarm).

09 2018-05-30

Updated ALM-0x02000007 Hard Disk Fault (Hard Disk, Major Alarm) and ALM-0x0200000B Hard Disk RAID Array Failed (Hard Disk, Major Alarm).

08 2018-05-14

Added ALM-0x06000017 RAID Card Overtemperature (RAID Card, Major Alarm).

07 2018-03-29

Added ALM-0x49000001 BMA Failed to Create the Transfer Mapping Table (BMA, Minor Alarm), ALM-0x1A00002F NAND Flash Service Life Lower Than Threshold (BMC, Major Alarm), and ALM-0x1A000031 Insufficient NAND Flash Reserved Blocks (BMC, Major Alarm).

06 2018-02-11

Added new alarms.

05 2017-12-28

Added new alarms.

04 2017-10-27

Added a parameter for alarm 0x06000007.

03 2017-10-12

Added new alarms.

02 2017-08-14

Added new alarms.

01 2017-06-30

The issue is the first official release.

Download
Updated: 2018-11-30

Document ID: EDOC1000157054

Views: 18218

Downloads: 46

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next