No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Server Purley Platform BIOS Parameter Reference 10

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Overview

This document describes the menus, parameters, and common operations of the basic input/output system (BIOS) for the servers using the Purley platform. In this document, the 2288H V5 server is used as an example unless otherwise specified.

This document applies to the following products:

  • 1288H V5
  • 2288H V5
  • 2488 V5
  • 2488H V5
  • 5288 V5
  • 5885H V5
  • 8100 V5
  • CH121 V5
  • CH221 V5
  • CH242 V5
  • G530 V5
  • G560 V5
  • XH321 V5

Intended Audience

This document is intended for:

  • Technical support engineers
  • System maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all changes made in previous issues.

Issue

Date

Description

10

2018-08-22

CH221 V5 node features are added.

Setting PXE for a PCIe Card (NIC) and Setting Serial Port RedirectionSetting SAN Boot for an HBA are added.

09

2018-07-25

G560 V5 node features are added.

08

2018-06-28

BIOS settings for the 5288 V5 and G5500 servers are added.

NVMe Information is added.

07

2018-06-02

The description of Power Policy is modified.

Changed G530 V2 to G530 V5.

06

2018-05-09

Accessing the Smart Provisioning GUI and Setting SAN Boot for an HBA are added.

05

2018-03-07

The description of MONITOR/MWAIT is modified.

04

2018-01-18

The description of Quick Boot and Quiet Boot is modified.

The USB Boot parameter is added to the Boot screen.

03

2017-12-05

BIOS settings for the 8100 V5 server are added.

2.6 Setting the System Language and 2.13 Setting the Boot Device are added.

02

2017-09-20

BIOS settings for the 2488 V5 server are added.

01

2017-04-13

This issue is the first official release.

Download
Updated: 2018-08-23

Document ID: EDOC1000163372

Views: 11136

Downloads: 759

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next