No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>


To have a better experience, please upgrade your IE browser.


Huawei V5 Server RAID Controller Card User Guide 13

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document


This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS3008, LSI SAS3108, Avago SAS3408, Avago SAS3508, Avago SAS3416iMR, Avago SAS3416IT, and Avago SAS3004iMR.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

The server maintenance personnel must have adequate knowledge about the server products and service skills to avoid injury to human body or damage to devices during maintenance.

Symbol Conventions

The symbols that may be found in this document are defined as follows.



Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all changes made in previous issues.

Issue 13(2018-09-15)

This issue is the thirteenth official release.

Added the overview and configuration about MSCC SmartRAID3152-8i, MSCC SmartHBA 2100-8i and Avago SAS3516.

Issue 12(2018-08-28)

This issue is the twelfth official release.

Modified the "Hard Drive Faults" sectoin for each type of RAID controller card.

Issue 11 (2018-08-21)

This issue is the eleventh official release.

Added the overview and configuration about LSI SAS3008IT.

Issue 10 (2018-07-20)

This issue is the tenth official release.

Added the description of the indicators on the LSI SAS3008 and LSI SAS3108 RAID controller cards.

Issue 09 (2018-06-26)

This issue is the ninth official release.

Added operations for restoring hard drives to the Frn-bad state for the LSI SAS3108.

Issue 08 (2018-05-31)

This issue is the eighth official release.

Changed "G530 V2" to "G530 V5" in the "Overview" section of the LSI SAS3008.

Issue 07 (2018-05-15)

The issue is the seventh official release.

  • Deleted the chapter "Environmental Specifications".
  • Added troubleshooting methods for scenarios in which "Some drivers are not healthy" is displayed.

Issue 06 (2018-04-20)

The issue is the sixth official release.

  • Optimized the document structure.
  • Updated GUI screenshots for the LSI SAS3108 to match firmware 4.660.00-8102 or later, and added new parameters.

Issue 05 (2018-01-31)

The issue is the fifth official release.

Added the overview and configuration about Avago SAS3004iMR.

Issue 04 (2018-01-10)

The issue is the fourth official release.

Added MegaRAID Storage Manager description for the LSI SAS3108.

Issue 03 (2017-12-15)

The issue is the third official release.

Added RAID controller card features, and configurations of the Avago SAS3408, Avago SAS3416iMR, and Avago SAS3416IT.

Issue 02 (2017-10-16)

The issue is the second official release.

Added Avago SAS3508 description and configuration.

Issue 01 (2017-08-09)

The issue is the first official release.

Updated: 2018-09-15

Document ID: EDOC1000163569

Views: 73026

Downloads: 1921

Average rating:
This Document Applies to these Products
Related Documents
Previous Next