No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CloudEngine 12800 and 12800E V200R002C50 Log Reference

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Intended Audience

This document is intended for network engineers responsible for CE series switches management and maintenance. You should be familiar with basic Ethernet knowledge and have extensive network management experience. In addition, you should understand your network well, including the network topology and deployed network services.

Conventions on Product Model Differences

This product contains multiple product models. The logs vary according to product models. Therefore, the contents described in this document may be different from those displayed on the switch that you purchase.

The logs described in this document are all logs supported by the product and are not differentiated by product model. The logs supported by each product model depend on the model.

Interface Number Conventions

Interface numbers used in this manual are examples. In device configuration, use the existing interface numbers on devices.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Command Conventions

The command conventions that may be found in this document are defined as follows.

Convention

Description

Boldface

The keywords of a command line are in boldface.

Italic

Command arguments are in italics.

[ ]

Items (keywords or arguments) in brackets [ ] are optional.

{ x | y | ... }

Optional items are grouped in braces and separated by vertical bars. One item is selected.

[ x | y | ... ]

Optional items are grouped in brackets and separated by vertical bars. One item is selected or no item is selected.

{ x | y | ... }*

Optional items are grouped in braces and separated by vertical bars. A minimum of one item or a maximum of all items can be selected.

[ x | y | ... ]*

Optional items are grouped in brackets and separated by vertical bars. Several items or no item can be selected.

&<1-n>

The parameter before the & sign can be repeated 1 to n times.

#

A line starting with the # sign is comments.

Mappings between Product Software Versions and NMS Versions

The mappings between product software versions and NMS versions are as follows.

CE12800&12800E series switches Product Software Version

NMS

V200R002C50

eSight V300R008C00/iManager U2000 V200R017C50

Mappings between Product Software Versions and Controller Versions

The mappings between product software versions and Controller versions are as follows.

CE12800&12800E series switches Product Software Version

Controller

V200R002C50

Agile Controller-DCN V300R001C20

Translation
Download
Updated: 2018-06-15

Document ID: EDOC1000166532

Views: 78683

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next