No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer G5500 Server User Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the full-width general-purpose compute module G560, full-width general-purpose compute module G560 V5, half-width general-purpose compute module G530 V5, full-width heterogeneous compute module GP608, full-width heterogeneous compute module GS608, half-width heterogeneous compute module GP308, and half-width heterogeneous compute module GP316 of the FusionServer G5500 in terms of physical structures, common operations, parts replacement, basic components, troubleshooting, software and configuration utilities, static electricity discharge, and product specifications.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

07

2018-09-18

This issue is the seventh official release.

Added the support for M.2 drives.

Updated Node Specifications.

06

2018-08-03

This issue is the sixth official release, and includes the following changes:

Added content related to G560 V5.

Added content related to GS608.

05

2018-06-02

This issue is the fifth official release, and includes the following changes:

Added content related to the GP308.

The compute module name is changed from G530 V2 to G530 V5.

04

2018-05-04

This issue is the fourth official release, and includes the following changes:

Added Software and Hardware Compatibility.

Added Upgrading the System.

Modified the document structure and optimized the document content.

03

2018-01-15

This issue is the third official release, and includes the following changes:

Added chapters about front bezels and external cables.

02

2017-12-15

This issue is the second official release, and includes the following changes:

Added information about the G530 V2 and GP316.

01

2017-11-01

This issue is the first official release.

Translation
Download
Updated: 2018-09-25

Document ID: EDOC1000174951

Views: 13300

Downloads: 135

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next