No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer G5500 Server iBMC (V270 to V282) User Guide 08

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers. It includes the following:

  • Functions and features of the iBMC
  • iBMC web user interface (WebUI)
  • iBMC command line interface (CLI)
  • Commands used on the iBMC
NOTE:

This document describes only the commands used to deploy and maintain Huawei servers. It does not include the following commands:

  • Commands for server manufacturing, assembling, and factory inspection and repair.
  • Commands for engineering implementation or fault locating.

Inappropriate use of these commands may result in device faults or service interruption. To obtain information about these commands, contact Huawei technical support.

This document applies to G5500 G560, G530 V5 nodes.

Intended Audience

This document is intended for:

  • Server installation engineers
  • Server maintenance engineers

The person who installs, manages, and troubleshoots servers must be qualified in servicing servers and trained in recognizing hazards in products with hazardous energy levels.

Change History

Updates between document issues are cumulative. Therefore, the latest document issue contains all updates made in previous issues.

Issue

Date

Description

08 2018-10-31

Updated Querying PCIe Topology Configurations (composition).

07 2018-09-17

Updated Basic Operations.

06 2018-06-12

Changed G530 V2 to G530 V5.

05 2018-06-01

Updated the description of System.

04 2018-04-25

Updated the user rights description in Table 3-36.

03 2018-01-24

Updated the user rights description in Restoring Default iBMC Settings.

02 2017-12-07

Updated the description of the One-Click Information Collection.

01 2017-11-06

This issue is the first official release.

Translation
Download
Updated: 2018-10-31

Document ID: EDOC1000174952

Views: 32681

Downloads: 56

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next