No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server Node iBMC (V260 to V278) User Guide 10

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers. It includes the following:

  • Functions and features of the iBMC
  • iBMC web user interface (WebUI)
  • iBMC command line interface (CLI)
  • Commands used on the iBMC
NOTE:

This document describes only the commands used to deploy and maintain Huawei servers. It does not include the following commands:

  • Commands for server manufacturing, assembling, and factory inspection and repair.
  • Commands for engineering implementation or fault locating.

Inappropriate use of these commands may result in device faults or service interruption. To obtain information about these commands, contact Huawei technical support.

This document applies to X6800 XH620 V3, XH622 V3, XH628 V3 server nodes.

Intended Audience

This document is intended for:

  • Server installation engineers
  • Server maintenance engineers

The person who installs, manages, and troubleshoots servers must be qualified in servicing servers and trained in recognizing hazards in products with hazardous energy levels.

Symbol Conventions

The following table lists the symbols that may be found in this document.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Updates between document issues are cumulative. Therefore, the latest document issue contains all updates made in previous issues.

Issue

Date

Description

10 2018-11-05

Updated Firmware Upgrade, Java Remote Virtual Console, and Independent Remote Console.

09 2018-08-08
08 2018-07-05

Updated Alarm Settings, and Remote Console.

07 2018-06-07
06 2018-05-30

Updated System, One-Click Information Collection and Restoring Default iBMC Settings.

05 2018-03-29

Updated Power Control, Energy Saving Settings and Setting the UID Indicator Status (locate).

04 2018-02-11

Updated Table 3-39.

03 2018-01-31
02 2017-12-28

Modified FDM.

01 2017-11-12

This issue is the first official release.

Translation
Download
Updated: 2018-11-21

Document ID: EDOC1000177672

Views: 23728

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next