No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>


To have a better experience, please upgrade your IE browser.


XH321 V5 Server Node V100R005 User Guide 04

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document


This document describes the appearance, functions, and structure of the XH321 V5, how to install, remove, and configure the XH321 V5, and how to install an OS supported by the XH321 V5.

The document provides guidance on how to replace internal components, configure boot options, redundant array of independent disks (RAID) properties, and IP address for the intelligent baseboard management controller (iBMC) of the server, log in to the web user interface (WebUI), and install an OS.

Intended Audience

This document is intended for:

  • Huawei technical support engineers
  • Technical support engineers from channel partners
  • Enterprise administrators

Symbol Conventions

The symbols that may be found in this document are defined as follows.



Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 04 (2018-08-02)

  1. Added the description of the maximum temperature supported by the server configured with an M.2 RAID controller card. For details, see Environmental Specifications.
  2. Added description about the features of the SoftRAID in the PCH. For details, see Configuring RAID.
  3. Added description about the Avago SAS3004iMR RAID controller card. For details, see Avago SAS3004iMR RAID Controller Card and Avago SAS3004iMR RAID Controller Card.

Issue 03 (2018-05-21)

The issue is the third official release.

Issue 02 (2018-01-22)

Modified environment parameter description.

Issue 01 (2017-12-29)

The issue is the first official release.

Updated: 2018-08-09

Document ID: EDOC1000183892

Views: 7153

Downloads: 122

Average rating:
This Document Applies to these Products
Related Documents
Previous Next