No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>


To have a better experience, please upgrade your IE browser.


Huawei SAP HANA Appliance Two Node Installation Guide (KunLun 9008 and 9016) 05

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document


This guide describes the installation and configuration of the two-node SAP HANA high availability (HA) cluster solution.

You can refer to this guide to learn SAP HANA and HA cluster solutions and perform HA cluster installation planning, operating system (OS) and database installation, network configuration, NTP service configuration, system replication configuration, and cluster HA configuration on the two SAP HANA server nodes.

OSs include the following:

  • SUSE Linux Enterprise Server (SLES) 12.1/12.2/12.3
  • Red Hat Enterprise Linux (RHEL) 7.2/7.4

SAP HANA databases include the following:

  • SAP HANA Database 1.0
  • SAP HANA Database 2.0

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers
  • Users

Symbol Conventions

The symbols that may be found in this guide are defined as follows.



Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices, and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 05 (2018-09-25)

This issue is the fifth official release. Added Responsibility Matrix and Problem Handling Process.

Issue 04 (2018-08-10)

This issue is the fourth official release. Optimized some content.

Issue 03 (2018-07-06)

This issue is the third official release.

Issue 02 (2018-03-23)

This issue is the second official release.

Issue 01 (2018-02-12)

This issue is the first official release.

Updated: 2018-09-28

Document ID: EDOC1100004729

Views: 5175

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Previous Next