No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>


To have a better experience, please upgrade your IE browser.


X6800 Server Node iBMC (V290 to V299) User Guide 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document


This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers. It includes the following:

  • Functions and features of the iBMC
  • iBMC web user interface (WebUI)
  • iBMC command line interface (CLI)
  • Commands used on the iBMC

This document describes only the commands used to deploy and maintain Huawei servers. It does not include the following commands:

  • Commands for server manufacturing, assembling, and factory inspection and repair.
  • Commands for engineering implementation or fault locating.

Inappropriate use of these commands may result in device faults or service interruption. To obtain information about these commands, contact Huawei technical support.

This document applies to X6800 XH620 V3, XH622 V3, XH628 V3 server nodes.

Intended Audience

This document is intended for:

  • Server installation engineers
  • Server maintenance engineers

The person who installs, manages, and troubleshoots servers must be qualified in servicing servers and trained in recognizing hazards in products with hazardous energy levels.

Change History

Updates between document issues are cumulative. Therefore, the latest document issue contains all updates made in previous issues.

Issue 09 (2018-08-08)

This issue is the ninth official release.

Issue 08 (2018-07-05)

This issue is the eighth official release.




Updated Alarm Settings, and Remote Console.

Issue 07 (2018-06-07)

This issue is the seventh official release.

Issue 06 (2018-05-30)

This issue is the sixth official release.

Issue 05 (2018-05-14)

This issue is the fifth official release.




Changed the document name to X6800 Server Node iBMC (V290 to V299) User Guide.

Issue 04 (2018-05-03)

This issue is the forth official release.




Updated About This Document.

Issue 03 (2018-04-10)

This issue is the third official release.




Updated System.

Issue 02 (2018-03-29)

This issue is the second official release.

Issue 01 (2018-02-11)

This issue is the first official release.

Updated: 2018-08-16

Document ID: EDOC1100005375

Views: 22021

Downloads: 57

Average rating:
This Document Applies to these Products
Related Documents
Previous Next