No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer G5500 Server G530 V5 Compute Node Maintenance and Service Guide 05

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the general-purpose half-width compute module G530 V5 as well as heterogeneous half-width compute modules GP316 and GP308 of the FusionServer G5500 in terms of physical structures, common operations, parts replacement, basic components, troubleshooting, software and configuration utilities, static electricity discharge, and product specifications.

Intended Audience

This document is intended for upgrade personnel. Upgrade personnel must:

  • Be familiar with the product networking and related NEs' versions.
  • Have device maintenance experience and be familiar with device operation and maintenance.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

05

2018-12-13

This issue is the fifth official release.

Added Installing a Partition Board.

Updated Installing a GP316, Installing a GP308, Installing a GPU Card and Logical structure.

04

2018-09-18

This issue is the fourth official release.

Updated Installing a GPU Card.

03

2018-08-03

This issue is the third official release.

Optimized Removing the BIOS Battery and Installing the BIOS Battery.

02

2018-06-15

This issue is the second official release.

The updated contents are as follows:

  • The compute module name is changed from G530 V2 to G530 V5.
  • Added content related to the GP308.
  • Added the description about the G530 V5 compute modules' support for RAID controller cards using LSI SAS3108 chips and supercapacitors.

01

2018-03-30

This issue is the first official release.

Translation
Download
Updated: 2018-12-14

Document ID: EDOC1100014661

Views: 15177

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next